User manual ICOM UX-R9000

[. . . ] INSTRUCTIONS UX-R9000 LCD UNIT Thank you for purchasing the UX-R9000 LCD UNIT. [. . . ] w Remove the speaker cable as shown in the diagram below. Speaker cable RWARNING: t Remove the 6 screws from the DISPLAY unit (CRT) and remove the cover as shown in the diagram below. DISPLAY unit cover y Remove the 4 screws and 2 connectors from the DISPLAY unit (CRT) and remove the unit as shown in the diagram below. DISPLAY unit e Remove the 4 screws and open the RF A/TV units as shown in the diagram below. r Remove the 4 screws and remove the SW-D unit as shown in the diagram below. RF A/TV unit SW-D unit INSTALLATION (continued) u Connect 2 connectors to the LCD unit and place the unit using the 4 screws. LCD unit o Remove the 4 screws from the front panel and replace the CRT screen filter with the LCD screen filter as shown in the diagram below. Assemble the front panel. LCD screen filter !0 Adjust the contrast, color, tint and brightness using the controls as shown below, if desired. i Replace the rubber spacer from the backside of the front panel with the supplied one. [. . . ] !3 Replace the top/bottom covers and the rack mounting handles. Count on us! 6-9-16 Kamihigashi, Hirano-ku, Osaka 547-0002 Japan A-8333-1EX Printed in Japan © 1999 Icom Inc. [. . . ]