User manual ICOM IC-F33GT

[. . . ] INSTRUCTION MANUAL VHF TRANSCEIVER UHF TRANSCEIVER iF33GT/GS iF43GT/GS This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. PRECAUTION R CAUTION!NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. (5 to 10 cm) away from the lips and the transceiver is vertical. SAVE THIS INSTRUCTION MANUAL -- This instruction manual contains important operating instructions for the IC-F33GT/GS VHF TRANSCEIVER and IC-F43GT/GS UHF TRANSCEIVER. R CAUTION! [. . . ] [P3]; TX Code Enter : Push to enter the direct ID code edit mode for both 5-tone and MSK. [UP]/[DOWN]; CH Up/Down : While in the standby condition, selects the operating channel. After pushing [Digital] or [TX Code CH Select], selects call list or TX code channel, respectively. [MONITOR]; Moni(Audi): Push this key after the communication to send a `Clear down' signal during MSK channel operation. [P0]; Call Appears Appears or blinks w Push and hold [PTT], then speak into the microphone at a normal voice level. ·" ·" " indicator appears. " appears while receiving a signal. e Release [PTT] to return to receive. r To finish the conversation, push [MONITOR] (Moni(Audi)) to send the `Clear down' signal. · Either station can send a `Clear down' signal. · " " disappears and the transceiver returns to the standby condition. 16 BIIS OPERATION 4 D Group call q When a group call is received; · Beeps sound. · The programmed text message (e. g. " ") and the calling station ID (or text) is displayed alternately, depending on the setting. · " " appears or blinks depending on the setting. D Displaying the received call record -- Queue indication The transceiver memorizes the calling station IDs for record. Up to 3 calls can be memorized, and the oldest call record is erased when a 4th call is received. However, once the transceiver is powered OFF, the all records are cleared. q Push [P1] (Digital) for 1 sec. · Displays following indication. When a record is available Appears Appears or blinks When no record is available w Push and hold [PTT], then speak into the microphone at a normal voice level. NOTE: Only one station is permitted to speak. ·" ·" " appears. " appears while receiving a signal. e Release [PTT] to return to receive. r To finish the conversation, push [MONITOR] (Moni(Audi)) to send the `Clear down' signal. · Either station can send a `Clear down' signal. (approx. ) · " " disappears and the transceiver returns to the standby condition. w Push [UP] or [DOWN] to select the desired call. again to return to the standby condition. · When no operation is performed for 30 sec. , the transceiver returns to the standby condition automatically. 17 4 BIIS OPERATION I Transmitting a call Total of a 3 ways for code selection are available--selecting the call code from memory, entering the call code from the keypad and calling back from the queue channel record. D Calling back from the queue channel q While in the standby condition, push [P1] (Digital) for 1 sec. w Push [UP] or [DOWN] to select the desired record. D Using call memory q While in the standby condition, push [P1] (Digital) to enter the call code memory channel selection mode. ·" " appears. Appears e Push [P0] (Call) or [PTT]* to call. *PTT call can be made only when PTT call capability is permitted. Call code text is displayed. w Push [UP] or [DOWN] to select the desired call code. e Push [P0] (Call) or [PTT]* to call. *PTT call can be made only when PTT call capability is permitted. NOTE: When no answer back is received, the transceiver repeats the call 3 times (default) automatically, and " " is displayed during each call. However, an error beep sounds and " " is displayed when no answer back is received after the calls. [. . . ] · HS-94/HS-95/HS-97 HEADSET + VS-1L VOX/PTT CASE HS-94: Ear-hook type HS-95: Neck-arm type HS-97: Throat microphone VS-1L: VOX/PTT switch box for hands-free operation, etc. Frequency range: 450­490 MHz · FA-SC56VS STUBBY ANTENNA Shorter VHF antenna. Frequency range: 150­162 MHz · FA-SC57VS STUBBY ANTENNA Shorter VHF antenna. Frequency range: 160­174 MHz Some options may not available in some countries. [. . . ]