User manual ICOM IC-2GXET

[. . . ] No risk of personal injury, fire or electric shock. SAVE THIS INSTRUCTION MANUAL -- This i Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. PRECAUTIONS R CAUTION!NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. [. . . ] then "Lo" (low power indicator) appears when the battery case operation is selected. · This operation may not be available depending on the pre-setting. Ask your dealer for details. KEY NUMBER P0 P1 P2 P3 (Side1) 0 5 1 6 2 7 3 8 4 9 e When the "PASSWORD" indication does not clear after inputting 6 digits, the input code number may be incorrect. Turn the power off and start over in this case. 11 BASIC OPERATION 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Channel selection Several types of channel selections are available. NON-ZONE TYPE: To select the desired operating channel: · Push [CH Up] or [CH Down]. · Rotate [ROTARY SELECTOR]*. - Up to pre-programmed 16 channels can be selected. AUTOMATIC SCAN TYPE: Channel setting is not necessary for this type. Scanning stops when receiving a call. * Depending on the pre-setting. When [Rotary selector] selects "Operating channel, " [CH Up]/[CH Down] are not available. When [Rotary selector] selects "Operating zone, " [Zone]/[Zone Up]/ [Zone Down] are not available. · Push one of [MR-CH 1] to [MR-CH 4]. ZONE TYPE: To select the desired zone: · Push [Zone], then push [CH Up] or [CH Down]. · Rotate [ROTARY SELECTOR]*. - Up to pre-programmed 16 zones can be selected. D Voting operation The transceiver automatically starts scanning when a zone, specified for the voting operation, is selected. Entering the user set mode: q While pushing and holding [P1] and [P2], rotate [VOL] to turn the power ON. · Turn power OFF in advance. · "SET MODE" appears for 1 sec at power ON. Emergency transmission When [Emergency] is pushed for the specified time period, an emergency signal is automatically transmitted. 9) When [Emergency] is pushed for the specified time period, the DTMF or 5-tone* emergency signal is transmitted once or repeatedly on the emergency channel. However, when no emergency channel is specified, the signal is transmitted on the previously selected channel. If you want to cancel the emergency call, push and hold the key again before transmitting the call. *Depending on the operating model type. w Push and hold [P0] to enter user set mode. Then push [Side2] or [Side3] to set the desired level/condition. · Available set mode functions are Backlight, LCD contrast, Beep, Beep Level, Ringer Level, SQL Level, AF Min Level, Mic Gain, VOX Gain*, VOX Delay*, Battery Voltage, Signal Moni, Lone Worker and System Info. * Appears only when the external VOX unit is connected. Man Down Emergency Call This function requires the optional UT-124R man down unit and can be performed in conventional mode. The man down emergency call function transmits an emergency call automatically when the transceiver has been left in a horizontal position. After the emergency call, the transceiver performs transmission and reception alternately with receiving a signal and emitting audio. When the emergency reset signal is received, the function is cancelled. [. . . ] · MB-96N/96F leather belt hanger 27 · BC-119N desktop charger + AD-106 charger adapter + BC-145S ac adapter For rapid charging of battery pack. · BC-121N multi-charger + AD-106 charger adapter (6 pcs. ) + BC-157 ac adapter For rapid charging of up to 6 battery packs (six AD-106s are required) simultaneously. · BC-160 desktop charger + BC-145S ac adapter For rapid charging of battery pack. 3 hours when BP-232N is attached. D CHARGERS D OPTIONAL UNITS · UT-109R /UT-110R scrambler units Non-rolling type (UT-109R)/Rolling type (UT-110R) voice scrambler unit provides higher communication security. [. . . ]