Detailed instructions for use are in the User's Guide.
[. . . ] We want to take a couple of moments of your time to thank you for making your IC-V82/U82 your radio of choice, and hope you agree with Icom's philosophy of "technology first. " Many hours of research and development went into the design of your IC-V82/U82.
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL-- This instruction manual contains important operating instructions for the IC-V82/U82.
EXPLICIT DEFINITIONS
DEFINITION Personal injury, fire hazard or electric shock R WARNING!WORD
D FEATURES
7 W*-- high transmit output power (*IC-V82, 5 W for IC-U82) CTCSS and DTCS encoder/decoder standard Optional digital modulator/demodulator Optional DTMF decoder
Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
i
PRECAUTIONS
RWARNING!NEVER hold the transceiver so that the
antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. [. . . ] Each memory channel, 0 to 199, may be assigned to one of the banks for easy memory management. q Push [C·MR] to select memory mode.
Push
C MR
Memory bank setting
q Push [C·MR] to select memory mode, then select the deY Z sired memory channel via [Y] or [Z].
Push
C MR
w Push [A·FUNC] and [8·SET] to enter
SET MODE.
[VOL]
6
w Push [A·FUNC] and [#·BANK] to enter memory bank selection.
· Bank indicator blinks.
[VOL]
Y Z e Push [Y] or [Z] several times until "bAk" appears.
· " " indication blinks as follows.
A FUNC
e Rotate [VOL] to select the desired bank, A to J.
· Banks that have no programmed contents are skipped.
A FUNC
r Rotate [VOL] to select the desired bank.
ENT
SET BANK ENT
8
r Push [·ENT lect the bank.
] (or [D·CLR]) to se-
· Indicator stops blinking.
Y Z t Push [Y] or [Z] to select the channel in the bank.
· No channel numbers are displayed for memory bank operation.
t Push [·ENT ] (or [D·CLR]) to assign the channel to the bank and return to regular memory condition. y Repeat steps q to t to assign another memory channel to the same or another bank. 16, 65) in INITIAL SET must be selected "FR, " otherwise the memory bank operation cannot be performed. 25
y To return to regular memory condition, push [A·FUNC] and [#·BANK] to enter memory bank mode, then push [·ENT ] (or [D·CLR]).
MODE
6
MEMORY/CALL OPERATION
Transferring bank contents
Contents of programmed memory banks can be cleared or transferred to another bank. INFORMATION: Even if the memory bank contents are cleared, the memory channel contents still remain programmed. Push [A·FUNC] and [#·BANK], then rotate [VOL] to select the desired memory bank.
· Bank indicator blinks. [VOL]
w Push [A·FUNC] and [8·SET] to enter
SET MODE.
[VOL]
Y Z e Push [Y] or [Z] several times until "bAk" appears.
· Bank indicator appears.
A FUNC
r Rotate [VOL] to select the desired bank to receive the transferred information or erase the bank contents.
· Select " " indication when erasing the contents from the bank.
ENT
SET
8
A FUNC
Push [·ENT ] (or [D·CLR]) to Y select the bank then push [Y] Z and [Z] to select the desired contents.
· Bank indicator stops blinking.
t Push [·ENT ] (or [D·CLR]) to transfer or erase, and return to regular memory mode. y Repeat steps q to t for transferring or erasing an another bank's contents.
BANK ENT
26
DTMF MEMORY
Programming a DTMF code sequence
The transceiver has 16 DTMF memory channels (d0 to dF) for storage of often-used DTMF code sequence of up to 24 digits. q Push [A·FUNC], then push [0·OPT] to enter OPTION SET MODE.
· Rotate [VOL] to select "dtm. OF, " if necessary. Or when an opY Z tional UT-118 DIGITAL UNIT is installed, push [Y] or [Z] several times until "dtm. OF" appears. 14, 65) Push
MONI PWR A FUNC B CALL C MR D CLR
8
A FUNC
SCAN
5
TONE
1
P. BEEP
2
T. SCAN
3
BANK
e Push [D·CLR] to stop the scan.
DUP
4
SCAN
5
SKIP
6
OPT
0
PRIO
7
SET
8
H/M/L
9
ENT
· Bank scan --Select the desired bank in step q above. q Push [A·FUNC] and [#·BANK] to select memory bank mode.
w Rotate [VOL] to select the desired bank, A to J. e Push [·ENT ] (or [D·CLR]) to select the bank.
31
8
SCAN OPERATION
Skip channels
In order to speed up the scan rate, you can select memory channels you don't wish to scan as skip channels. q Push [C·MR] to select memory mode, if necessary.
· "X" appears.
Priority watch
Priority watch checks for signals on "priority channels" while operating on a VFO frequency.
D Memory or call channel watch
While operating on a VFO frequency, memory or call channel watch monitors for signals in the selected memory or call channel every 5 sec. e Push [A·FUNC], then push [7·PRIO] to start watching.
w Select a memory channel to set as a skip channel. ePush [A·FUNC] and [6·SKIP] to toggle the skip setting ON and OFF.
· "SKIP" appears when the channel is set as a skip channel. Push
A FUNC
SKIP
6
"SKIP" appears
· VFO is displayed, then the decimal point ". ", on the frequency readout blinks. · When the signal is detected on the priority channel, the watching is suspended according to the setting of the scan resume condition.
VFO frequency Memory channel
5 sec.
50 msec.
r Push [D·CLR] to stop watching.
32
SCAN OPERATION D Memory scan watch
While operating on a VFO frequency, memory scan watch monitors for signals in each memory channel in sequence, every 5 sec. q Push [C·MR] to select memory mode, if necessary.
· "X" appears.
8
Scan resume condition
USING
SET MODE
wPush [A·FUNC], then push [5·SCAN] to start the memory scan. e Push [A·FUNC], then push [7·PRIO] to start the watching.
· VFO is displayed, then the decimal point ". ", on the frequency readout blinks. · When the signal is detected on the priority channel, the watching is suspended according to the setting of the scan resume condition.
VFO frequency
Mch 3 Mch 2 Mch 1
When a signal is received during scanning, the scan resume condition determines what action the transceiver takes. [. . . ] · BC-146 BATTERY CHARGER + BC-147 AC ADAPTER For regular charging of battery packs. · BC-119N DESKTOP CHARGER + AD-101 CHARGER ADAPTER For rapid charging of battery packs. · BC-121N MULTI-CHARGER + AD-101 CHARGER ADAPTER (6 pcs. ) For rapid charging of up to 6 battery packs (six AD-101's are required) simultaneously. Charging time: 1. 5 to 2 hrs.
D OTHER OPTIONS
· HM-75A/HM-131L SPEAKER-MICROPHONES Combination speaker-microphones that provide convenient operation while hanging the transceiver from your belt. [. . . ]