User manual I-ROCKS IR-9200
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual I-ROCKS IR-9200. We hope that this I-ROCKS IR-9200 user guide will be useful to you.
 |
Manual abstract: user guide I-ROCKS IR-9200
Detailed instructions for use are in the User's Guide.
[. . . ] The Installation of External Box Please read this installation carefully before you use the products.
Precaution:
1. USB bus can supply the fixed volt for 5V/500mA to supply for USB system. [. . . ] Aim tray at rails and push to a fixed point to close the tray.
4.
After connect transfer cable and power cable, your system will detect the drive automatically.
DC-in Transfer cable Attention: If this HDD is new one, please partition & format disk, otherwise the system cannot detect HDD.
6
Driver Installation:
Windows 98SE 1. After plug the external box into, the system will remind you there is a new hardware of USB Storage Adapter add into. Design the driver of the safe path (in the driver), the system will active the installation automatically. After for a while, click "My Computer", USB HDD will appear the relativity on the PC. Windows ME/2000/XP The system already provided support for the software. The Driver is the "GeneUSBIDE_05E3_0702. sit" under the catalogue of the MAC, copy the document to the tope a table and clicks the document out, and then it will occur the document of the driver automatically. Connect with the USB HDD OS 9. X or later edition: The system already provides support for the software.
7
The divided partition of the USB HDD
Windows 98SE/ME SYSTEM FDISK is command that doing the divided partition to HDD, The step of how to divided partition from the HDD by using FDISK as follows: 1. After enter the FDISK program [If the FDISK program does not work, please restart your PC again (don't plug out the USB HDD) then it will be work]. Firstly select "The fifth item" --select the USB HDD you want to divided partition for, then just see the illustration as follows: Then just follow the instruction to divided partition for the HDD of USB.
Windows 2000/XP Plug the USB HDD into your system, it will appear the hot plug a play. Just click "Control Panel"/ "manage tool" / "computer management" / "Disk management". [. . . ] How to solve it if you can't use the Mobile Dish under some OS: It doesn't support any USB device under the WIN95 and NT4 OS, so that can't use the Mobile Disk. If the PC & MAC cannot be in common use, you can use the MACOPEN software (download from the Internet) in the PC, format to the MAC model.
10 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE I-ROCKS IR-9200
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual I-ROCKS IR-9200 will begin.