User manual I-CAN 1110TH MOON

[. . . ] All Rights Reserved The product described in this manual is protected by national and international copyright laws. Any duplication of the software or hardware comprising the product is strictly prohibited. In addition, no part of this manual may be reproduced or transmitted, in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, without the prior written permission of the manufacturer. Disclaimer The manufacturer specifically disclaims all warranties, either express or implied, including but not limited to merchantability, accuracy, completeness, noninfringement or fitness for a particular purpose, with respect to the software, the accompanying product manual(s) and written materials, and any accompanying hardware. The manufacturer reserves the right to revise or make improvements to its product and related materials at any time and without obligation to notify any person of such revisions or improvements. [. . . ] button in order to open the window where you In the Setting a Timer screen you set the data concerning a particular Timer. The data you are asked to define are as follows: Mode: Choose between TV and Radio. Channel List: Choose the list which contains a channel for which you want to set a notification (Timer). Press the button to open a calendar, which can help you to set the date. Start Time: Set the time when you want the viewing or recording to start. Setting a Timer End Time: Set the time when you want the viewing or recording to end. Timer type: Choose whether you want to record (Recording) or view (Viewing) the broadcast content. Frequency: Choose how often you want a Timer to take place (once, daily or weekly). Once means that the Timer is defined only for one viewing or recording. Daily means that the timer is defined for each day from Monday to Friday. In the Set a Timer window, by pressing items, and by pressing / / you move the highlight to particular buttons you change the values of the highlighted items. For the Channel, Date and Start/End Time modification you can also use the number buttons on your remote control. When you set all the values, press . If the Receiver Lock option (Main Menu ­ For Parents) is set to Yes, you will be asked to enter the PIN code every time you set a Recording Timer. Setting a Reminder You can set a Reminder in the EPG and the Channel Banner. Press either or button): to display information about the next program. When the program icon appears in the Channel Banner. information concerns the next program, the . Press the Reminder. button on your remote control to display the window where you can set a to set a Viewing Reminder . When the Setting a Reminder window is displayed, press or press to set a Recording Reminder. 4 1110TH Island You can set a Reminder when the Channel Banner displays the information about the current channel or in the browsing mode. Display the information about the program for which the Reminder has been set (by pressing the / buttons when the Channel Banner is displayed) button to display the Canceling a Reminder window. to confirm. To modify Reminders, go to Viewer Planner under the Main Menu. If the Receiver Lock option (Main Menu ­ For Parents) is set to Yes, you will be asked to enter the PIN code, if the program for which you want to set a Recording Reminder exceeds the Parental Level settings or is broadcast on a locked channel. When your decoder is in standby mode (the LED indicator on the front panel illuminates red), all the accepted Recording Timers and Reminders will be recorded. Please note that any screens displayed during recording will be recorded as well. [. . . ] Audio & video issues Symptom The picture on your TV screen changes color. This may happen after a power-cut or after your decoder has been disconnected from the power source. Your TV is blank or "snow" appears on the screen. · Check the connection between the decoder and VCR. · Make sure your VCR is set properly. Remedy Your decoder has lost some of its software settings. [. . . ]