User manual HUTCHINSON FLEXONIC BROCHURE

[. . . ] Indb 1 2012-02-23 4:34:21 A detailed User’s Manual is built into your TV. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Important Warranty Information Regarding Wide screen format PDP Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill the screen, if your model offers this feature, with the images constantly in motion. [. . . ] On the Use Mode screen, select the Home Use using your remote, and then select Next. If you select Store Demo, some functions will not work, and the TV will reset all functions to their factory default after a certain period of time. 3 Network Settings: Configure the network settings To configuring your network settings, select Start using your remote, and then go to 3A - Wireless Network or 3B - Wired Network on the next page. If you do not know your network configuration information or want to configure the settings later, or do not have a network, select Skip, and then go to 6 - Auto Program (1) on page 24. To configure network settings later, refer to “Setting up the Wired or Wireless Network” in the e-Manual or see the Network Connection sections in this manual (pages 14 and 30). You can set up the network connection later using the onscreen Network menu. The TV searches for and then displays all the wireless networks within range. In the list of networks, move the Highlight to select a network, and then select Next. If the selected network requires a Security Key, the Security Key screen appears. œ✎ If you have a WPS(PBC) compatible router, select WPS(PBC) instead, and then follow the directions on the screen. €• You can enter numbers by pressing the number buttons on the remote. 9 Clock: Set the Clock Select Auto or Manual, and then select Next. In 6 - Auto Program (1), you Auto can only set the current time and date manually, using your remote. If you selected Auto, the TV will automatically download the correct time from a digital channel. The DST function sets the time ahead one hour to adjust the clock for Daylight Savings Time. You can also turn the DST function on through the TV's on screen menu (Menu → System → Time → Clock → DST). 10 Setup Complete Review the Setup data, and then select Close to finish. To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is on. Push the Controller to the left (to MENU (m)) and hold for more than 5 seconds. To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds. Indb 25 2012-02-23 4:34:39 Changing the Input Source Source ™ → Source When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable box or STB satellite receiver, you need to change the Source. SOURCE ✎✎ Alternatively, you can access the Source screen by pressing the SOURCEs button on your remote. [. . . ] tV-Holder (BN96-15753A) Screw (M8 X L19) Installing the TV-Holder 1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in the TV-Holder Kit that is designated for your TV. Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed. œ✎ If you fasten the screw to the wall, we recommend you drive the screw into a stud. [. . . ]