User manual HUSQVARNA YTH200 TWIN

[. . . ] Please read these instructions carefully and make sure you understand them before using this machine. ⷠNever allow children or people unfamiliar with the instructions to use the lawnmower. ⷠNever mow while people, especially children, or pets are nearby. ⷠKeep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. [. . . ] ⷠStop tractor by turning ignition key to "OFF" position. ⷠDrive tractor forward for approximately five feet then backwards for five feet. The machine is equipped with a safety switch which immediately breaks the current to the engine if the driver leaves the seat with engine running and with the connection/ disconnection lever in position "connection". To Move Forward and Backward The direction and speed of movement is controlled by the forward and reverse drive pedals. To Use Cruise Control The cruise control feature can be used for forward travel only. ⷠWith forward drive pedal depressed to desired speed, move cruise control lever forward to "SET" position and hold while lifting your foot off the pedal, then release the cruise control lever. Cutting Lower the cutting unit by moving the lift lever forward and connect the cutting unit. Choose a driving speed which suits the terrain and required cutting results. Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. uSING THE ROS · With engine running, turn ignition key counterclockwise to ROS "ON" position. WARNING: Disconnect spark plug wire to prevent accidental starting before attempting any repair, inspection, or maintenance. Check to see all bolts, nuts, and cotter pins are in place and secure. Keep tractor free of dirt and chaff to prevent engine damage or overheating. Water can enter engine and transmission and shorten the useful life of the machine. clean Steering Plate: · Clean debris from steering plate. Fill in dates as you complete regular service As Needed Every 8 hours Every 25 hours Every . Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately. ⷠThe engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position. cHECK OPERATOR PRESENCE SYSTEM: · When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine. [. . . ] Your tractor's deck is equipped with a washout port on its surface as part of its deck wash system. ⷠDrive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach. IMPORTANT : Make certain the tractor's discharge chute is directed AWAY from your house, garage, parked cars, etc. ⷠPull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck (C). [. . . ]