User manual HUSQVARNA WG 4815 E

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA WG 4815 E. We hope that this HUSQVARNA WG 4815 E user guide will be useful to you.


HUSQVARNA WG 4815 E : Download the complete user guide (1537 Ko)

Manual abstract: user guide HUSQVARNA WG 4815 E

Detailed instructions for use are in the User's Guide.

[. . . ] Operator's Manual WG4815E/968999120 WG3613E/968999117 WG3613BF/968999365 WG3613EC/968999756 Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. English ©2008 HTC. Printed in U. S. A. Contents INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Congratulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Squeezing the lever will reduce tension on the wheel drive belt, eliminating power to that wheel. If the motion control lever is squeezed even tighter the brake will be applied to that wheel and a tighter more abrupt turn is accomplished. Turn left by squeezing the left hand lever or turn right by squeezing the right hand lever. If you squeeze both levers the mower will stop. 8011-482 Gear shift lever 1 4 2 3 8011-482 1. Handle Handle with bail in neutral position Husqvarna-25 operation Reverse Depress one operator presence lever and shift transmission to the reverse gear. Do not drive across slopes. 8011-482 Gear shift lever Operating on hills To operate on slopes is a dangerous mowing job. • The slowest speed possible should be used before starting up or down hills. • Make all turns slowly. 26 - Husqvarna operation Mowing Tips • • • • • • Observe and mark rocks and other fixed objects in order to avoid collisions. The blades should be parallel to the ground or slightly tipped down in the front. This will result in more even distribution of clippings and a more uniform cut. To avoid clippings spraying on roads etc, mow the first two patterns in opposite direction. Begin with a high cutting height and reduce it until the desired mowing result is attained. Cut the average lawn to 2½" (64 mm) during the cool season and to over 3" (76 mm) during the hot months. For healthier and better looking lawns, mow often after moderate growth. For best cutting performance, grass over 15 cm (6") in height should be mowed twice. Use a high engine speed (the blades rotate rapidly) and low speed (the machine moves slowly) for the best mowing results. If the grass is not too long and dense, the driving speed can be increased without noticeably depreciating the mowing result. The mowing becomes more even and the grass clippings more evenly distributed over the mown area. The total time taken is not increased as a higher driving speed can be used without poorer mowing results. The mowing result is poorer because the wheels sink into the soft lawn, clumps build, and the grass clippings will fasten under the cowling. Avoid getting engine too wet. 8011-409 Mowing pattern • • WARNING!Avoid sudden directional changes. • • • • • 8011-639-01 Clean mower deck after each use Husqvarna-27 operation Stopping Emergency stop Release both hands from the operate presence lever handles. [. . . ] All 300 series trimmers, brushcutters, clearing saws, hovering trimmers, stick edgers, backpack blowers, hand held blowers, hedge trimmers, power-assist collection systems for commercial, institutional, professional or income producing purposes or use. 1 Year Conditional Component Warranty: Chain saw crankshafts for commercial/professional use (parts and labor). Saw must be operated with Husqvarna XP 2 cycle oil. 90 Day Commercial Warranty: Automatic mower, chain saws, 100 series trimmers, power cutters, stump grinders, pole saws, pole pruners, snow throwers, model series 580 & 600 walk-behind mowers, or any Husqvarna product used for commercial, institutional, professional, municipality or income producing purposes or use except as otherwise provided herein. Batteries: 1 year prorated limited warranty with 100% replacement during the first 6 months. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA WG 4815 E




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA WG 4815 E will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.