User manual HUSQVARNA T85 BS

[. . . ] Sound power level, measured dB(A) 101 102 Sound power level, guaranteed dB(A) Sound levels (see note 2) Sound pressure level at the operators ear, dB(A) Vibration levels, ahv (see note 3) On the workpiece, m/s2 2, 0 Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EN 12418. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1. Before leaving our factory every machine passes an exacting inspection programme in which everything is checked minutely. Following the instructions will ensure that your machine gives long service, in normal operating conditions. [. . . ] The user advice and spare parts mentioned in this document are given as an indication, and do not constitute an undertaking. No warrantee will be granted in the event of errors or omissions, or for damage occurring during delivery, or caused by the design or use of the machine. We are very concerned about the quality of our products and we reserve the right to make any technical modifications to improve them, without warning. Prevent accidents due to unsuitable use, by an untrained person, during maintenance, repairs, overhauls, handling or transport · improve the reliability and durability of the machine · Ensure correct use, regular maintenance, and fast fault finding in order to reduce repair costs and downtime. The use of symbols on machines (in color) and in the manual identify advice concerning your safety. OBLIGATIONxxxxBlue background, white marking : obligatory safety OBLIGATIONxxxx+ red marking : movement forbidden WARNINGxxxxBlack triangle and marking on a yellow background : danger if not adhered to. Risk of injury to the user or third parties, with possibility of damage top the machine or the tool. PROHIBITIONxxxx Red circle with or without bar : use or presence prohibited. INFORMATIONxx xxInformation - Instruction: special instructions concerning use and inspection. Pass the material slowly and without force, through the diamond blade. The manufacturer declines all responsibility for loss or damage resulting from misuse or any modification, alteration or powering that does not conform to the manufacturer's original specifications. At the work station, the sound pressure level may exceed 85 db (A) In this case individual protection measures must be taken. Check frequently the water level through the overflow (change water as often as necessary) After each use, stop the machine by means of the on - off switch. Repairs Contact your supplier who is entirely at your service to carry out repairs in the shortest time at the best possible price. The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice. In the event of deterioration and scrapping of the machine, the following items must be disposed of in accordance with the requirements of the legislation in force. Anslutning till nätet med en kabel typ H07 RNF med tvärsnittsarea 1, 5 mm upp till 50 m. [. . . ] Anslutning till nätet med en kabel typ H07 RNF med tvärsnittsarea 1, 5 mm upp till 50 m. Reparationer Vi finns alltid till hands för dig för att reparera din maskin inom kortast möjliga tid och till våra bästa priser (adressen finns på baksidan). WARRANTY The warranty is limited to the free of charge replacement of parts recognised as defective by Husqvarna (excluding wear components and consumables) providing the repair is made within after-sales service of Husqvarna or a recognised Husqvarna repair centre. The manufacturer is not responsible for any direct or indirect, material or immaterial, damages caused to persons or things by failure of the machine or the non operation of the machine. [. . . ]