User manual HUSQVARNA T25 RS

[. . . ] Before using your cultivator, please make sure you have understood the contents of this manual. Familiarise yourself with how the cultivator and its controls work, before using it. [. . . ] If any of the following happens, first stop the motor and remove the cable from the spark plug: - Whenever you have to adjust the blades, - Whenever you clean, service or repair the cultivator, - If you hit a foreign body, inspect the machine to see if it has been damaged. - If the cultivator starts vibrating in an abnormal way, immediately look for the cause of the trouble and make any necessary repairs. Stop the motor if either of the following happens: - Whenever the cultivator is to be left unattended, - Before adding petrol. When about to engage the blades, make sure there is nobody in front of or close to the cultivator. Hold the handlebar tight - it has a tendency to lift when the blades engage. While working, keep at a safe handlebar's length from the blades. Remove all stones, wire, glass, metal and loose objects from the area to be dug. Do not alter the adjustment of the motor's speed regulator; do not over-rev. Spares of substandard quality may damage the machine and endanger your safety. To avoid fire risk, wait until the motor has cooled down before putting it away. Before putting the cultivator away remove any loose vegetation, especially around the motor once it has cooled. To reduce the risks of fire, keep the silencer and the area around the fuel tank free from leaves and oil. [. . . ] Do not touch the accelerator control screw as it has been adjusted at the factory. Do not use inflammable solvents to clean the foam insert in the air filter. [. . . ]