User manual HUSQVARNA T200 COMPACT PRO

[. . . ] Pay particular attention to information preceded by the following indications: DANGER This sign urges you to be careful when carrying out certain operations. Indicates a strong possibility of serious physical injury, even death, if the instructions are not followed. In case of problems arising or for any questions regarding the accessory, please contact your distributor. This machine is designed to ensure a safe and reliable service, if the machine is used in accordance with the instructions. [. . . ] 1- Place your machine with the rotating blades against a wall and the handles on the ground. This ensures that the oil filler cap (1) is 45° from the vertical. 2- Unscrew the cap (1) and pour the entire contents of the container into the engine housing. 3- Keep the measuring container as it will be useful when you need to refill the engine oil. Using a non-detergent oil or a 2-stroke oil can shorten the operational life of the engine. - Fill with petrol in a well-aired location with the engine switched off. Do not smoke and avoid having naked flames or sparks near to where you fill with petrol or where the - Do not overfill the tank (there should not be any petrol in the neck of the tank). After having filled with petrol, make sure that the petrol tank cap is correctly closed. Before starting the engine, make sure that any spilt petrol has dried and that the fumes have evaporated. - Avoid direct skin contact with the petrol and avoid inhaling the fumes. You will find in the table below all the information and operating tips for the different accessories that can be used with your machine. These include work that can be carried out and the different types of soil. ADVICE Assemble the blades with the tips facing backwards and don't apply pressure on the jackleg. Assemble the blades with the tips facing forwards to trim and cut the grass. To add a finishing touch, assemble the blades with the tips facing backwards. Assemble the blades with the tips facing backwards and press very gently on the handlebars to maintain good control over the machine. Put the tips of the blades facing forwards and apply a light pressure on the handlebars. Put the tips of the blades facing backwards and don't put any pressure on the handlebars. Put the tips of the blades facing forwards and apply light pressure on the handlebars. Well-kept and running soil Moving between two rows to remove grass Moving between two rows on hard soil Soft soil Lawn with grass longer than 5 cm Assemble the edger as indicated opposite: Operate the engine at mid rating and preferably on dry ground. GB OPERATING THE MACHINE Before starting the engine aTTENTION · Before starting your machine, ensure that nobody is in the working area, especially children or animals. When starting your machine, it is of the utmost importance that you position yourself in the shaded area (see sketch opposite). [. . . ] By positioning the axis of the engine parallel to the ground, place your machine with the rotating blades against a wall and the handles on the ground. PRECAUTION : If the engine has been in operation, allow it to cool down for at least 30 minutes before proceeding to clean the machine. Remove mud, pieces of grass, dirt and other foreign substances from the body of the machine and the blade assembly. Wash the engine by hand, paying attention to not allow water to penetrate the air filter. [. . . ]