User manual HUSQVARNA ROYAL 48 SE

[. . . ] Tilting or lifting the lawnmower may cause stones to be thrown out Keep bystanders away. Do not mow whilst people especially children or pets are in the mowing area Beware or severing toes or hands. Disconnect the spark plug before attempting any maintenance, cleaning or adjustment, or if you are going to leave the lawnmower unattended for any period. Wait until all machine components have completely stopped before touching them. [. . . ] Never operate the lawnmower with damaged guards or without guards in place. Always start the lawnmower carefully with feet well away from the blades. Do not put hands near the grass discharge chute whilst engine is running. Do not attempt any maintenance on your lawnmower when the engine is hot. Stop the engine, and wait until the blade has stopped:before leaving the mower unattended for any period; 22. Stop the engine, wait until the blade has stopped and disconnect the spark plug lead:before refuelling before clearing a blockage; before checking, cleaning or working on the appliance; if you hit an object. Do not use your lawnmower until you are sure that the entire lawnmower is in a safe operating condition. Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of mowing. Keep all nuts, bolts and screws tight to be sure the lawnmower is in safe working condition. Only use the replacement blade, blade bolt, spacer and impeller specified for this product. Never store the lawnmower with fuel in the tank inside a building where fumes can reach an open flame or spark. If the engine fails to start when you turn the key your battery may need charging. Please note:- Your Royal 53SE can be started manually by following steps 1-5 in Starting & Stopping Royal 53S, 53S Intek Key Start Only - During mowing, your engine will recharge the battery Engaging the Drive - See Royal 53S, 53S Intek Stopping - See Royal 53S, 53S Intek Forward drive is engaged and disengaged with the Powerdrive lever at the top of the handle (J4). Start mowing from the outside edge of the lawn, mowing in strips in alternate directions (M2). Mow twice a week in the growing season, your lawn will suffer if more that one third of its length is cut at one time and this may also result in poor collection. The height of cut is altered by pulling the adjustment lever away from the location slots and moving to the selected position (M3). Please Note:Do not overload your Lawnmower When mowing in long thick grass a first cut with the cutting height adjusted to its highest setting, see Cutting Height, will help reduce engine overload and will help prevent damage to your lawnmower. IMPORTANT Do not attempt any maintenance on your lawnmower when the engine is hot. Do not clean with chemical, including petrol, or solvents - some can destroy critical plastic parts. Using a soft brush remove grass clippings from the engine air intakes and exhaust (N3), cutting height adjustment area. IMPORTANT Do not attempt any maintenance on your lawnmower when the engine is hot. USE GLOVES Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. [. . . ] ⷠContact your local authority for information of your nearest Recycling/Disposal Station. ⷠDo NOT dispose of used fuels/oils with household waste · Waste fuels/oils are harmful, but can be recycled and should be disposed of through the recognised facilities. * Clean more often under dusty conditions, or when airborne debris is present or after prolonged operation cutting tall, dry grass. Engine Servicing & Guarantee The engine fitted to your lawnmower is guaranteed by the Engine Manufacturer. [. . . ]