User manual HUSQVARNA HU1236B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA HU1236B. We hope that this HUSQVARNA HU1236B user guide will be useful to you.


HUSQVARNA HU1236B : Download the complete user guide (5164 Ko)

Manual abstract: user guide HUSQVARNA HU1236B

Detailed instructions for use are in the User's Guide.

[. . . ] Always wear: • • • A protective helmet where there is a risk of falling objects Approved hearing protection Approved eye protection Other symbols/decals on the machine refer to special certification requirements for certain markets. Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Wear sturdy, non-slip boots. Only use non-metallic, flexible cutting attachments, i. e. trimmer heads with trimmer cord. Noise emission to the environment according to the European Community’s Directive. [. . . ] 1 Tighten the hip strap so that it sits securely. 20 – English ASSEMBLY 2 Tighten the chest strap under your left arm so that it fits closely around your body. Correct balance 1 Forestry clearing The machine is balanced by moving the suspension ring on the machine forwards or backwards. On some models the suspension ring is fixed, however, this will then have a number of holes for the support hook. The machine is correctly balanced when it freely hangs horizontally from the support hook. In this way the risk of hitting stones is reduced if you need to release the handlebar. 3 Adjust the shoulder strap to distribute the load evenly across your shoulders. Press downwards on the suspension hook to load the harness. 2 Grass clearing Let the blade balance at a comfortable cutting height, i. e. close to the ground. 4 Adjust the height of the suspension hook as described in the instructions for the standard harness. (Forestry clearing) 5 If you need to lower the suspension hook, for trimming for example, move the suspension strap (A) to the lower mounting point on the backplate. The elastic strap (B) can be tightened to transfer more load from the shoulder straps to the hip strap. 6 A B English – 21 FUEL HANDLING Fuel safety Never start the machine: 1 2 If you have spilt fuel on it. If you have spilt fuel on yourself or your clothes, change your clothes. Check regularly for leaks from the fuel cap and fuel lines. Petrol 3 CAUTION!If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Always stop the engine and let it cool for a few minutes before refuelling. When refuelling, open the fuel cap slowly so that any excess pressure is released gently. Always move the machine away from the refuelling area before starting. • • • Do not mix more than one month’s supply of fuel at a time. If the machine is not used for some time the fuel tank should be emptied and cleaned. • • • Always use a fuel container with an anti-spill valve. Ensure that the fuel is well mixed by shaking the container before filling the tank. ! WARNING!Be aware of the fire hazard, especially when working near flammable substances and/ or vapours. English – 23 STARTING AND STOPPING Check before starting Starting and stopping • Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. The complete clutch cover and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury. Always move the machine away from the refuelling area before starting. Ensure the cutting attachment cannot come into contact with any object. Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. [. . . ] Check that the safety release on the harness is not damaged and works. Check the fuel filter from contamination and the fuel hose from cracks or other defects. Check and clean the spark arrestor mesh on the muffler (only applies to mufflers fitted with a catalytic converter). Replace the vibration damping elements after each season, however, at least once a year. X X X X X X English – 35 TECHNICAL DATA Technical data 343R Engine Cylinder displacement, cm3 Cylinder bore, mm Stroke, mm Idle speed, rpm Recommended max. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA HU1236B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA HU1236B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.