User manual HUSQVARNA EDGER ATTACHMENT

[. . . ] Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Non authorised modifications and/or accessories can result in serious personal injury or the death of the operator or others. This accessory may only be used together with the intended clearing saw/trimmer, see under heading "Approved accessories" in chapter Technical data in the machine's Operator's Manual. [. . . ] This section takes up the basic safety precautions for working with the edger. â· If you encounter a situation where you are uncertain how to proceed you should ask an expert. â· Avoid all usage which you consider to be beyond your capability. â· Ensure no one comes closer than 15 metres when working. Never allow anyone else to use the machine without first ensuring that they have understood the contents of the Operator's Manual. To ensure that people, animals or other things cannot affect your control of the machine. â· To ensure that the above mentioned do not come into contact with the cutting equipment or objects that can be thrown by the cutting equipment. Never use a machine without the possibility of calling for help in the event of an accident. Safety instructions before starting work Remove any objects, such as stones, broken glass, nails, steel wire, string, etc. Children, animals, onlookers and helpers should stand outside of the safety zone of 15 m (50 feet). Check for fuel leakage and that all safety guards and covers are complete and fastened securely. For example, thick fog, heavy rain, strong winds or extreme cold, etc. To work in bad weather conditions is tiring and can create dangerous circumstances, e. Look out for any obstacles with unexpected movement (roots, stones, branches, pits, ditches, etc. Never put the machine down with the engine running unless you have good sight of it. Safety instructions while working â· Always ensure you have a safe and firm foothold. [. . . ] The flexible drive axle is easily removed from the shaft by taking a firm grip on the axle end. lubricate the flexible drive axle over its entire length and reinsert it in the shaft. Turn the axle while inserting it so that it correctly engages in the clutch. [. . . ]