User manual HUSQVARNA DS 150

[. . . ] You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Always use common sense It is not possible to cover every conceivable situation you can face. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert before continuing. [. . . ] Secure and cordon off the area and make sure that no one can be injured or material damaged. Store the equipment in a lockable area so that it is out of reach of children and unauthorised persons. Store the drilling machine and stand in dry and frost free conditions. There is always a risk of crush injuries when working with products containing moving parts. Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination. Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator's manual. Be careful as clothing, long hair, and jewellery can get caught in moving parts. Never work alone, always ensure there is another person close at hand. Apart from being able to receive help to assemble the machine, you can also get help if an accident should occur. It is our wish that you will be satisfied with your product and that it will be your companion for a long time. By following its content (using, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you will sell this machine, make sure that the buyer will get the operators manual. A purchase of one of our products gives you access to professional help with repairs and services. If the retailer who sells your machine is not one of our authorised dealers, ask him for the address of your nearest service workshop. husqvarna Construction Products has a policy of continuous product development. Husqvarna reserves the right to modify the design and appearance of products without prior notice and without further obligation introduce design modifications. The base plate is made of aluminium and is therefore very light weight. The drill stand is equipped with a quick connection plate for the drillmotor. Feed lever can be used to adjust base plate leveling screws and set desired column tilt. The base plate is made of aluminium and is therefore very light weight. Feed lever can be used to loosen/tighten drill motor clamping, to adjust base plate leveling screws and set desired column tilt. Fit the wheel set in the mount on the backside of the bottom plate and tighten the screws. [. . . ] Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected. Use a flat screwdriver and turn clockwise to guide the roller closer to the column. The lifetime of your machine can be extended considerably if it is used, cared for and maintained in the proper manner. Use the feed lever to see if the feed housing moves smoothly on the column. [. . . ]