User manual HUSQVARNA CARDINAL 6310

[. . . ] Repair instruction Description: C4 Flush mechanism Part number: 21066 Inlet tube / 20292-62 Flush tube / 21065 Bellow/2029162 Flush mechanism Look for Service Centers, Point of Sale addresses and other information on: www. 21066 Inlet tube / 20292-62 Flush tube / 21065 Bellow A Lift the flush cap up with your finger (1) 1. 09/11 Description:Leaflet 21039 1 C Inside view, nozzle (5) has to be taken out. Note : Inlet tube and Flush tube can easily be replaced by pulling of the part and press the new part on. [. . . ] 23382 2/2 04/10 Repair instruction Description: C250 S/CS Electric Valve Part number: 23709 Look for Service Centres, Point of Sale addresses and other information on: www. Eu Version: Date: Tools required: V2 Mai 2011 A Remove Waste holding tank B Remove bowl retainer bracket closest to the door Take the bowl inner off 42799 1/4 05/11 C Remove retaining clip Remove valve D Slide hose clamp over tube Push new valve in tube, arrow should be in direction of water flow E Push tube onto valve Assemble hose clamps 42799 2/4 05/11 F Route tubing around bowl Warning!Lip to be at inside G Push the Bowl inner assembly back in position Bring tube back in position H Rotate the retainer back in position Assemble the retainer Rotate the retainer back in position in position 42799 3/4 05/11 I Place waste holding tank back into toilet 42799 4/4 05/11 Repair instruction Description: SC250 Overlay Part number: 50708 Look for Service Centres, Point of Sale addresses and other information on: www. Com Version: Date: Tools required: 1 June 2010 Stanley knife A Using a sharp object such as a stanley knife carefully peel back the overlay taking care not to damage the main body of the toilet B Remove overlay and place new overlay 42695 1/1 06/10 Repair instruction Description: SC250 Control panel Part number: 50709/50710/50711 Look for Service Centres, Point of Sale addresses and other information on: www. Com Version: Date: Tools required: 1 June 2010 Stanley knife, flat head screwdriver A Locate the overlay on the top of the toilet B Using a sharp object such as a stanley knife carefully peel back the overlay taking care not to damage the main body of the toilet C Once the overlay has been removed use a flat head screw driver to unclip the panel that houses the control panel and turn it over 42689 1/2 06/10 D Simply unclip the control panel from its housing. **Note E Take note of the positioning of the wire connecting as this is important when re-attaching F Remove control panel and replace with new G Clip the control panel back into its housing and clip the two parts back in the toilet H Replace the overlay ** In case the PCB is glued with hotmelt to the housing, steps D until G can be left out. 42689 2/2 06/10 Repair instruction Description: SC250 CWE Pump Part Number: 50712 Look for Service Centres, Point of Sale addresses and other information on: www. Eu Version: Date: Tools required: V1 June 2010 Electrical crimps A Drain the flush water tank, remove the waste tank and remove the fuse B Locate the pump and remove from it’s housing by moving the two arms away from each other C Once the pump has been removed disconnect the flush tube from the top of the pump and remove the tube from the base of the water tank 42690 1/3 06/10 D Cut the faulty cable leaving enough wire to allow for ease of reconnection. E Strip back the wires to show the bare cable F Crimp the cable of the new pump to the existing wiring using the connections supplied G Reconnect the flush tube to the top of the pump 42690 2/3 06/10 H Reconnect the flush tube to the base of the water tank making sure the clip is in place and push the opposite end onto the pump I Replace the pump into its housing J Replace the fuse and holding tank, add a couple of litres of water to the flush tank and test. 42690 3/3 06/10 Repair instruction Description: SC250 Reed Switch Part Number: 50713/50714/50715 Look for Service Centres, Point of Sale addresses and other information on: www. Eu Version: Date: Tools required: V1 June 2010 A Remove the waste tank and locate the reed switch which can be found on a stem towards the front of the toilet B Simply remove the reed switch by pulling it up and away from its housing at the top of the stem C Replace the reed switch and ensure that it is correctly inserted into the wiring harness connection 42697 1/1 06/10 Repair instruction Description: C250 Reed switch housing Part number: 50716 Look for Service Centres, Point of Sale addresses and other information on: www. Eu Version: Date: Tools required: 1 June 2010 Stanley knife, flat screwdriver A Remove wasteholding tank out Cassette toilet. B Locate the reed switch housing which can be found in the back where the waste-holding tank is taken out. Before replacing the new reed switch housing, use hot melt to keep the housing on its place and place cable back. D 42780 1/1 06/10 Repair instruction Description: C250CWE Drain Part number: 50717 Look for Service Centres, Point of Sale addresses and other information on: www. B Place flat screwdriver between drain and tank and push drain loose. 42781 1/1 06/10 Repair instruction Description: SC250/400 Pour out spout Part number: 5071992/3230606 Look for Service Centres, Point of Sale addresses and other information on: www. Com Version: Date: Tools required: 1 April 2010 - A Turn pour out spout anti clockwise and take it out. 51310 1/1 04/10 Repair instruction Description: SC250/C260 Waste-holding tank plate Part number: 50723-06 Look for Service Centres, Point of Sale addresses and other information on: www. Com Version: Date: Tools required: 2 August 2011 Philips head screwdriver In case you are operating on a C250 and changing your Holding Tank, The Holding tank Mechanism, or the plate only of the Holding tank mechanism, it is strongly recommended to also change the bowl retainer bracket to avoid Leakage !B Using the sliding cover as a lever, rotate the complete mechanism anti clockwise until the arrow points to the second dot C Remove 3 screws out of retainer. D Press two ribs from retainer in, take it off and remove blade arm. [. . . ] 1/1 05/10 Cassette Toilet C400 Right: Left: Follow instructions 1 2 3 180° 4 5 6 51057/0411 Repair instruction Description: SPP Level indicator FWT Excellence Part number: 92405-111/60/130/135 Look for Service Centres, Point of Sale addresses and other information on: www. Com Version: Date: Tools required: 1 January 2012 Flat screwdriver – nose plier A Open outercase, put plastic on the side and pull seat & cover off. Place flat screwdriver under level indicator, lift it up and take complete level indicator out. B C Place new level indicator, press it in and place seat & cover back. [. . . ]