User manual HUSQVARNA 372 XP EPA II

[. . . ] Operator’s manual 365 EPA I 372XP EPA II Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. English KEY TO SYMBOLS Symbols on the machine: WARNING!Careless or improper use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Symbols in the operator’s manual: Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Always wear approved protective gloves. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor Regular cleaning is required. Visual check. Both of the operator′s hands must be used to operate the chain saw. Protective goggles or a visor must be worn. Never operate a chain saw holding it with one hand only. Filing with oil and adjusting oil flow. Contact of the guide bar tip with any object must be avoided. The chain brake must be engaged when the chain saw is started. Tip contact may cause the guide bar to move suddenly upward and backward (socalled kickback), which may cause serious injury. Recommended cutting equipment in this example: - Bar length 16 inches - Max. [. . . ] As the chain brake is still activated the engine must return to idling speed as soon as possible by disengaging the throttle latch in order to avoid unnecessery wear on the clutch assembly. A ! WARNING!Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk. 20 – English STARTING AND STOPPING • Never start a chain saw unless the bar, chain and all covers are fitted correctly. Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injury. Stopping • The chain brake should be activated when starting. This method is very dangerous because you may lose control of the saw. The engine is stopped by pushing the stop switch to the stop position. • • Never start the machine indoors. Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. • Always hold the saw with both hands. The right hand should be on the rear handle, and the left hand on the front handle. Use a firm grip with thumbs and fingers encircling the chain saw handles. English – 21 WORKING TECHNIQUES Before use: Basic safety rules 1 • • Look around you: To ensure that people, animals or other things cannot affect your control of the machine. To make sure that none of the above might come within reach of your saw or be injured by falling trees. , 1 2 3 4 5 6 7 8 9 Check that the chain brake works correctly and is not damaged. Check that all parts of the chain saw are tightened correctly and that they are not damaged or missing. Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident. 2 Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc. Take great care when removing small branches and avoid cutting bushes (i. e. Small branches can be grabbed by the chain and thrown back at you, causing serious injury. 10 Check the chain tension. General working instructions IMPORTANT!This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Before using a chain saw you must understand the effects of kickback and how to avoid them. Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine’s safety equipment. A tree that is under tension may spring back to its normal position before or after being cut. If you position yourself incorrectly or make the cut in the wrong place the tree may hit you or the machine and cause you to lose control. [. . . ] Serious injury to the operator, helpers, bystanders or any combination of these persons may result from one-handed operation. A chain saw is intended for twohanded use. Do not operate a chain saw when you are fatigued. Use safety footwear; snug-fitting clothing, protective gloves, and eye, hearing and head protection devices. Move the chain saw at least 10 feet (3 m) from the fueling point before starting the engine. [. . . ]