User manual HUSQVARNA 345 EPA II

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA 345 EPA II. We hope that this HUSQVARNA 345 EPA II user guide will be useful to you.


HUSQVARNA 345 EPA II : Download the complete user guide (1928 Ko)

Manual abstract: user guide HUSQVARNA 345 EPA II

Detailed instructions for use are in the User's Guide.

[. . . ] Operator’s manual 340 (EPA II)345 (EPA II) 350 (EPA I) English Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. KEY TO SYMBOLS Key to symbols WARNING!Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: • • • Approved protective helmet Approved hearing protection Protective goggles or a visor Refuelling. Filling with oil and adjusting oil flow. [. . . ] If you have spilt fuel on yourself or your clothes, change your clothes. Check regularly for leaks from the fuel cap and fuel lines. • • Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. 3 Transport and storage • Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like. For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station. Ensure the machine is cleaned and that a complete service is carried out before long-term storage. The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage. • • Place the chain saw on the ground and hold the rear handle down with your right foot. Make sure the chain saw is steady and the chain is not touching the ground or other objects. Then grasp the starter handle with your right hand and pull the starter cord. Never wrap the starter cord around your hand • • • English – 17 SAFETY INSTRUCTIONS General working instructions • Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc. ) in case you have to move suddenly. This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Do not attempt any task that you feel unsure of! Before using a chain saw you must understand the effects of kickback and how to avoid them. Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the heading How to avoid kickback. • Basic safety rules • Look around you: To ensure that people, animals or other things cannot affect your control of the machine. To make sure that none of the above might come within reach of your saw or be injured by falling trees. Take the utmost care when cutting through branches or logs that are in tension. A log or branch that is in tension can suddenly spring back into its natural position before or after you cut it. If you stand on the wrong side or start cutting in the wrong place it may strike you or your chain saw, so that you lose control. Both situations could cause serious injury. • Before moving your chain saw switch off the engine and lock the chain using the chain brake. Fit a guard to the bar before transporting the chain saw or carrying it for any distance. Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident. • Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. [. . . ] The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding maximum nose radius of a solid bar. There may be other combinations available, which will also achieve kickback reduction. As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be considered to have equivalent kickback energy. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA 345 EPA II




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA 345 EPA II will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.