User manual HUSQVARNA 333 R

[. . . ] Operator’s manual (EPA) 333R 335FR 335RX-series Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. English KEY TO SYMBOLS Symbols WARNING!Careless or incorrect use can result in serious or fatal injury to the operator or others. trimmer heads with trimmer cord. 1. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: • • • A protective helmet where there is a risk of falling objects Approved hearing protection Approved eye protection Starting instructions 2. 3. 2 3 1 4. 5. Max. [. . . ] Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres. • Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked. Starting Choke: Set the choke control in the choke position. • Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or 20 – English STARTING AND STOPPING Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled. For throttle handles with a start throttle lock: Set the throttle to the start position by first pressing the throttle lockout and the throttle trigger, then pressing the start throttle button (A). Then release the throttle lockout and the throttle trigger, followed by the start throttle button. To return the engine to idle, press the throttle lockout and throttle trigger again. ! WARNING!When the engine is started with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately. Hold the body of the machine on the ground using your left hand (CAUTION!Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord. Never wrap the starter cord around your hand Repeat pulling the cord until the engine starts. return choke control to run position and apply full throttle; the throttle will automatically disengage from the start setting. Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine. Stopping Stop the engine by switching off the ignition. CAUTION!In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. CAUTION!Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Do not use a machine with damaged spark plug cap. English – 21 WORKING TECHNIQUES General working instructions IMPORTANT!This section describes the basic safety precautions for working with clearing saws and trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. You must understand the difference between forestry clearing, grass clearing and grass trimming before use. Both situations can cause serious personal injury. 6 7 Keep a good balance and a firm foothold. Hold the machine on the right side of your body. Basic safety rules 1 • • • 2 3 4 Look around you: To ensure that people, animals or other things cannot affect your control of the machine. To ensure that people, animals, etc. , do not come into contact with the cutting attachment or loose objects that are thrown out by the cutting attachment. [. . . ] Warranty services or repairs will be provided at all Husqvarna Forest & Garden distribution centers that are franchised to service the subject engines. Throughout the emissions warranty period of two years, Husqvarna Forest & Garden must maintain a supply of warranted parts sufficient to meet the expected demand for such parts. WARRANTY PERIOD Any warranted part that is scheduled for replacement as required in the maintenance schedule, is warranted for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled replacement, the part will be repaired or replaced by Husqvarna Forest & Garden at no cost. [. . . ]