User manual HUSQVARNA 125 BV X

[. . . ] Electrical connection - ELECTRICAL SAFETY : Operate this machine only on a supply equipped with a 30 mA earthed current-limiting circuit-breaker. [. . . ] If it does, clean it: Unscrew the carboy and remove the filter Clean them both and reassembler. Check regularly whether the cylinder head filter needs cleaning: Unscrew the four cylinder head screws. Extract the filter (see exploded diagram) Clean the filter with a jet from the centre outwards. PREFACE Before leaving our factory, all pumps undergo a series of tests in which everything is stringently checked. Place the machine on a dry surface or dry ground · If the motor will not start when set to 1 (Start), then: Check the power supply to the site (fuses, cut-out switch) Check the extension lead (wrongly connected, faulty wire) Check the cable is properly plugged in Check the on-off switch Scrapping In the event of deterioration and scrapping of the machine, the following items must be disposed of in accordance with the requirements of the legislation in force. When setting up, follow the instructions for use and protection · The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice. Vid användning av förlängningssladd, se till att kabelns area är tillräckligt stor area för angiven effekt; 1, 5 mm2 area upp till 50 mm. [. . . ] Vi står till ditt förfogande för att utföra samtliga reparationer inom kortast möjliga tid och till bästa möjliga pris (se adress på baksidan). [. . . ]