User manual HUMMINBIRD SCREEN CAPTURE INSTALLATION GUIDE

[. . . ] 1 Screen Capture and Side Imaging Cursor 531452-1_A Thank You Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Contact our Customer Resource Center at either 1-800-633-1468 or visit our website at www. humminbird. com. Feature Overview This sheet describes two new features that have been added to your 900 Series: · Screen Capture · Side Imaging Cursor. Screen Capture When Screen Capture is enabled (from the Accessories menu tab), pressing the MARK key creates a saved screen capture on the optional-purchase MMC/SD card installed in your unit's card slot (when you have an optional-purchase MMC/SD card installed). NOTE: You must have an optional-purchase MMC/SD card installed for the screen capture feature to work. [. . . ] A status dialog box will appear that shows the progress of the save, and that displays the numbered filename assigned to the . BMP file that is being created, along with the percentage completed status. NOTE: Navigation is not affected by the Screen Capture feature. Also, if Screen Capture is enabled but there is no GPS receiver connected, pressing the MARK key (or far right Preset View key if your unit does not have a MARK key) will capture the screen image and display an error saying that a GPS position fix is required to create a waypoint. NOTE: The speed of the capture depends on the type of card you use; in general, SD cards capture the screen faster than MMC cards do. © 2005 Humminbird®, Eufaula AL, USA. All rights reserved. 2 Screen Capture and Side Imaging Cursor 531452-1_A 3. Viewing Screen Captures 1. Make sure that the optional-purchase MMC/SD card used to capture the screens is installed in your card slot. The Screen Capture View displays up to three thumbnails of these screen captures at a time. You can scroll through the whole list of thumbnails of screen captures in this view using the 4-WAY Cursor keys. See the full-sized image by selecting a thumbnail (using the Up or Down 4-Way Cursor keys), then using the Right 4-Way Cursor key to view the full image. A red border around the full-size screen capture indicates that it is just a screen capture, not a "live" view. You can delete the selected image, or all captured images, using Delete Image or Delete All Images from the X-PressTM menu. NOTE: You may view data files associated with each screen capture by removing the MMC/SD card from your unit and installing it in your optional-purchase MMC/SD card reader connected to a PC. Use Windows Explorer to see the contents of your MMC/SD card; you will notice that a . DAT (may show up as . TXT) file is created for every . BMP screen capture; this data file includes the thumbnail view, and is required in order to be able to view the screen capture from your 900 series unit, so don't delete these files. 4. Deleting Captured Images Once you have images captured and stored on your optional-purchase MMC/SD card, you may delete selected images, or all images at once, using the X-PressTM Menu when in the Screen Capture View. Delete Image (Screen Capture view only) Delete Image allows you to delete a single screen capture image from the Screen Capture View. This menu option is only available when you have an optional-purchase MMC/SD card installed and you are in Screen Capture view. To delete a single screen capture image: 1. From the Screen Capture View, select the image you want to delete, then highlight Delete Image on the X-PressTM Menu. [. . . ] The waypoint will be positioned off to the side of where the boat had been when the sonar return selected by the cursor was acquired. The waypoint is placed where the object you are pointing to is located, assuming that the object was on the bottom and that the bottom was flat. Since this is only an approximation, the waypoint may be slightly out of position, but should be reasonably close. [. . . ]