User manual HUMMINBIRD LEGEND 2000

[. . . ] Operations Manual Operational instructions for Humminbird Legend 2000 Series including the Legend ­2000, 2005, 2000 Deep and 2005 Deep THANK YOU Thank you for choosing Humminbird®, America's#1 name in fishfinders. Humminbird has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] The factory setting is 6. leaving control of the depth range to the user. Both the upper and lower depth ranges can be adjusted to show the bottom, or any other desired depth, in greater detail. When first switched to MANUAL mode, the LEGEND 2000 SERIES defaults to the current automatic depth range; however, after the manual depth ranges have been set, the LEGEND 2000 SERIES uses the new settings until it is powered off, when it defaults to factory settings. MANUAL mode works best in areas of relatively flat bottom or if you are trolling slowly. It is also ideal for displaying a small area of the overall depth range in great detail if you are looking for fish at a specific depth. Manual Mode Upper Depth Range Adjustment Indicator 8 Lower Depth Range Adjustment Indicator USING THE LEGEND 2000 SERIES CHART SPEED / SONAR VIEW / LIGHT / CONTRAST / RTS WINDOW Sonar View SONAR VIEW (Deep Models only) selects the source of the sonar information being displayed. 200kHz displays sonar information and FISH ID from the 200kHz beam only. 50kHz displays sonar information and FISH ID from the 50kHz beam only. SPLIT SCREEN presents the sonar information from the 200kHz and 50kHz beams simultaneously in side-byside windows. 200KHZ/50KHZ displays the sonar information from the 200kHz beam and target information from the 50kHz beam. The CONTRAST setting is retained in memory after the unit is turned off as long as it is set between 6 and 10. The factory setting is 8. Split window 50kHz/200kHz, shown with metric depth, °C and kph digital readouts available on international models. RTS Window RTS WINDOW selects the width of the window dedicated to REAL TIME SONARTM. Selecting NARROW decreases the width of the RTS WINDOW leaving more space for the CHART WINDOW, but some sonar returns will not be visible. Selecting WIDE makes the RTS WINDOW wider and shows more of the sonar intensity information, but less space on the LCD is available for sonar history. Selecting OFF turns off the RTS WINDOW and the entire LCD shows sonar history. Note: When the RTS Window is adjusted to Wide, no grayscale information is shown. The RTS WINDOW setting is retained in memory after the LEGEND 2000 SERIES is turned off. The factory setting is NARROW. The SONAR VIEW setting is retained in memory after the unit is turned off. The factory setting is 200KHZ. Surface Clutter SURFACE CLUTTER eliminates most Light LIGHT activates the display backlight and selects the brightness level. The backlight is manuallycontrolled except when the unit first powers up. During initial power up, the backlight turns on at full brightness so the display will be visible at night. The backlight will then begin to decrease in intensity automatically until it is off in order to save energy. Selecting the CONTROL PANEL LIGHT choice stops the automatic off process, keeping the backlight on at the intensity level selected. The Light setting defaults to factory settings after the Legend 2000 Series is turned off. The factory setting is ON full at power up and automatic decrease to OFF. Contrast CONTRAST enhances the viewability of the LCD by making it darker or lighter. [. . . ] After the original warranty period, a standard flat rate service charge will be assessed for each repair (physical damage and missing parts are not included). Any repairs made after the original warranty will be warranted for an additional 90 days after service has been performed by our factory technicians. You can contact our Customer Resource Center or visit our website to verify the flat rate repair fee for your product (visit the Product Support section): http://www. humminbird. com We reserve the right to deem any product unserviceable when replacement parts are no longer available or impossible to obtain. This applies only to Humminbird products returned to our factory in Eufaula, Alabama. [. . . ]