User manual HUMMINBIRD ICE 35

[. . . ] ICE 35, ICE 45, ICE 55 Installation and Operations Manual 531611-1_A THANK YOU! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first two years after purchase, and available at a reasonable rate after the two-year period. [. . . ] Store the transducer in the transducer well. NOTE: You do not have to detach the transducer cable from the control head to store the transducer. CAUTION: Although the transducer signal cable is designed to be flexible in cold temperatures, you must store your cable correctly to avoid stressing it. Make sure it is coiled smoothly, with no kinks, and that it is clear of the zippers on the portable bag. Storing the Transducer Cable Wrapped Around Storage Posts Float Tucked Under Control Head Transducer Well 15 TEST AND FINISH THE INSTALLATION Once you have assembled both the ICE Flasher SeriesTM control head and the Ice Fishing transducer, and have routed all the cables, you should perform a final test. After connecting the transducer to the control head, and confirming that the power cable is connected to the battery, drop the transducer into the ice hole to confirm proper operation. WARNING: Before walking onto the ice, make sure that conditions are safe. 2. Turn the Power/Range dial to A (Auto) or x1 to power-on the control head. NOTE: If the unit does not power up, make sure that the connector is fully seated in the back of the control head, the power cable is connected to the battery, and the battery is charged. 3. If all connections are correct and power is available, the Humminbird® control head will enter Normal operation, and you should see the bottom on the control head display. If the bottom is visible on-screen with a digital depth readout, the unit is working properly (ICE 35 will only display the bottom on the Flasher Dial). NOTE: The transducer must be submerged in water for reliable transducer detection. The bottom of the transducer should be even with the bottom of the ice or hang slightly below the bottom of the ice. 16 GETTING STARTED USING YOUR ICE FLASHER SERIESTM FISHFINDER Your ICE Flasher SeriesTM interface is easy to use. A combination of keys and special features allows you to control what you see on the Flasher Dial and Active Display. Refer to the following illustration, and see Key Functions for more information. 4 3 1 5 6 7 8 9 2 10 1 Flasher Dial 2 Range Scale (ICE 35) Active Display (ICE 45/55) Zoom Key 6 Gain/Backlight Key (ICE 45/55) 7 Noise/Units Key (ICE 45/55) 8 Beam/Battery Key 9 Power/Range Dial 10 3 Selection Dial 4 Color Key (ICE 55) 5 Target Key (ICE 55) 17 POWERING UP THE CONTROL HEAD Power-on your ICE 35/45/55 Flasher by turning the Range/Off dial to any range setting. The ICE Flasher SeriesTM Fishfinder will immediately enter Normal operation, and the sonar return signals from the bottom will be displayed on the Flasher Dial. SIMULATOR Use the Simulator to learn how to use your ICE Flasher SeriesTM Fishfinder before taking it out on the ice. The Simulator is a very powerful tool that simulates on-the-water operation, providing a randomly-updated display. We recommend going through this manual while using the Simulator, since all of the menus function the way they actually do when in Normal operation. To begin Simulator mode, hold down the Selection dial while powering on the control head. Exit the Simulator by powering your ICE 35/45/55 off. WHAT'S ON THE FLASHER DIAL The ICE Flasher SeriesTM Fishfinder uses a backlit circular display, together with a multi-button keypad, to control all user functions. In addition, multiple color palettes are available, depending on your model. Sonar return signals are displayed as colored lines on the Flasher Dial. The color and thickness of the lines reflect the strength of the sonar return or the size and density of the object. In addition, multiple color palettes are available, depending on your model. All Humminbird® ICE Flasher SeriesTM Fishfinders provide a multicolor palette, where red = strong, yellow = medium, and green = weak sonar return signals. If you have a high-end ICE 55 Flasher, you will also have the choice of 2 additional color palettes. The color palette you have selected will determine the appearance and significance of the individual color lines that appear on the Flasher Dial. NOTE: The location of an object in relation to the transducer can influence how it appears on the Flasher Dial. [. . . ] If you contact the factory by e-mail, please include your product model name and serial number in the e-mail, and use Request for Repair Authorization Number for your e-mail subject header. You should include your Repair Authorization Number in all subsequent communications about your unit. For IN-WARRANTY service, complete the following steps: · Obtain a Repair Authorization Number from the Humminbird® Customer Resource Center. · Tag product with your name, street address, phone number and your assigned Repair Authorization Number. · Include a copy of your receipt (to show proof and date of purchase). [. . . ]