User manual HUMMINBIRD AS GR16

[. . . ] GR16 GPS Receiver Accessory Manual 531478-1_B Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® accessory is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® accessory does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An Enhanced fix has been augmented using information from WAAS, EGNOS, or MSAS. HDOP (the Horizontal Dilution of Precision) is a GPS system parameter which depends on the current satellite configuration. HDOP is used to calculate the Estimated Position Error. 19 PC Connect (With PC Connect Cable only) Use PC Connect to update the software of the Fishing System control head. Complete instructions are included with the PC Connect Cable accessory. NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at www. humminbird. com or contact our Customer Resource Center at 1-800-633-1468. Exit PC Connect mode by powering the Fishing System off. 20 Sonar X-PressTM Menu (Sonar Views only) The Sonar X-PressTM menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-PressTM menu. NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode. The Mark and Cancel Navigation menu selections will be added to the Sonar X-PressTM Menu when a GPS is connected to the Fishing System. See your Fishing System Operations Manual for information on the standard Sonar X-PressTM Menu choices. Sonar X-PressTM Menu 21 Mark Mark allows you to mark the position of a waypoint, either at the current boat location, or, if the Cursor is active, at the current Cursor location. Use the RIGHT 4-Way Cursor Control key to mark the location of a Waypoint. Cancel Navigation (only when Navigating) Cancel Navigation discards the current route and exits Navigation Mode. This menu choice will only appear when you are currently navigating a route. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation. To avoid canceling navigation, press the LEFT Cursor key. 22 Navigation X-PressTM Menu (Navigation Views only) The Navigation X-PressTM menu provides access to the settings most frequently used. Press the MENU key once while in the Bird's Eye View, the Track or the Combo View to access the Navigation X-PressTM menu. NOTE: Menu choices will vary depending on system settings, such as whether you are currently navigating. The Navigation X-PressTM menu will be added to the menu system when a GPS is connected to the Fishing System, and will contain the following choices: · Mark · Zoom · Go To · Waypoint [Name] · Cursor to Waypoint · Save Current Track · Clear Current Track · Skip Next Waypoint (Only When Navigating) · Cancel Navigation (Only When Navigating) · Remove Target (Only if a Target is Active) · Remove Grid (Only if a Grid is Active) · Sonar Window (Combo View Only) · Waypoint [Name]. Navigation X-PressTM Menu 23 Mark Mark allows you to mark the position of a waypoint, either at the current boat location, or, if the Cursor is active, at the current Cursor location. Use the RIGHT 4-Way Cursor Control key to mark the location of a Waypoint. Zoom Zoom allows you to change the scale of the Bird's Eye, Track and Combo Views. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Zoom level. Go To Go To allows you to start Navigation towards a waypoint. If the Cursor is active, choosing Go To creates a waypoint and starts navigation towards that waypoint; if the Cursor is not active, choosing Go To displays the list of waypoints, so that you can select the waypoint towards which you want to navigate. Navigation will begin immediately if the Cursor is active or the Waypoint selection list will appear. Select a waypoint and navigation will begin immediately. 24 Waypoint [Name] (Only with an active cursor on a waypoint) Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under your cursor. Move the cursor onto an existing waypoint and press the MENU key once, or use Cursor to Waypoint to select a waypoint from a list of saved waypoints. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu, which contains the following menu choices: Waypoint Submenu The Waypoint Submenu contains the following menu choices: Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the Chart and Combo Views. Delete allows you to delete a waypoint from the list of saved waypoints. Target allows you to apply a target to a waypoint selected from the list of waypoints. [. . . ] Generally, all GPS units have a limited number of Track Points that can be saved before the unit runs out of memory and begins erasing the first track points saved. Because of this, the user can adjust the Track Point Interval menu to increase the amount of time between when points are saved, and thus extend the distance covered by a track. Tracks can also be permanently saved to memory, and re-displayed at the user's option. Track Line (TRK): The Track Line is the desired line of travel between two waypoints, and represents the most efficient path between the two points because it is a straight line. [. . . ]