User manual HUBBELL LIGHTING REMOTE HANGER ASSEMBLY

[. . . ] Make sure that the GPS switch is set to OFF during take off and landing of an airplane (HDR-CX350V/XR350V). Menu items, LCD panel, and lens (software, including "PMB Help") Handbook (PDF) "Operating Guide" (1) See page 18 for the memory card you can use with this camcorder. Using the camcorder Do not hold the camcorder by the following parts, and also do not hold the camcorder by the jack covers. A menu item that is grayed out is not available under the current recording or playback conditions. The LCD screen is manufactured using extremely high-precision technology, so over 99. 99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that appear constantly on the LCD screen. These points are normal results of the manufacturing process and do not affect the recording in any way. Shoe cover Black points White, red, blue or green points LCD Screen Exposing the LCD screen or the lens to direct sunlight for long periods of time may cause malfunctions. [. . . ] OFF Does not use an effect. LANDSCAPE*( ) Shoots distant subjects clearly. This setting also prevents your camcorder from focusing on glass or metal mesh in windows between the camcorder and the subject. 66 US WHITE FADER Fades in/out with the white effect. INDOOR () In The white balance is appropriately adjusted for the following recording conditions: Indoors At party scenes or studios where the lighting conditions change quickly Under video lamps in a studio, or under sodium lamps or incandescent-like color lamps Out BLACK FADER Fades in/out with the black effect. Out In ONE PUSH ( ) To cancel the fader before starting the operation, touch [OFF]. Tips When you press START/STOP, the setting is cleared. A movie recorded using [BLACK FADER] may be difficult to see in the VISUAL INDEX screen. The white balance will be adjusted according to the ambient light. Frame a white object such as a piece of paper, to fill the screen under the same lighting conditions as you will shoot the subject. When the white balance has been adjusted and stored in the memory, the indicator stops flashing. Notes Set [WHITE BAL. ] to [AUTO] or adjust the color in [ONE PUSH] under white or cool white fluorescent lamps. keeps When [ONE PUSH] was selected, if , set [WHITE flashing after touching BAL. ] to [AUTO]. If you set [WHITE BAL. ], [SCENE SELECTION] is set to [AUTO]. WHITE BAL. (White balance) You can adjust the color balance to the brightness of the recording environment. Customizing your camcorder AUTO The white balance is adjusted automatically. OUTDOOR ( ) The white balance is appropriately adjusted for the following recording conditions: Outdoors Night views, neon signs and fireworks Sunrise or sunset Under daylight fluorescent lamps Tips If you have changed the battery pack while [AUTO] was selected, or taken your camcorder outdoors after inside use (or vice versa), aim your camcorder at a nearby white object for about 10 seconds for better color balance adjustment. 6 US When the white balance has been set with [ONE PUSH], if the lighting conditions changed by bringing your camcorder outdoors from inside the house, or vice versa, you need to redo the [ONE PUSH] procedure to readjust the white balance. Touch the subject in the frame of which you want to adjust the exposure. To return the setting to automatic exposure, touch [AUTO]. SPOT MTR/FCS (Spot meter/ focus) You can adjust the brightness and focus for the selected subject simultaneously. 68) at the same time. Notes [EXPOSURE] is automatically set to [MANUAL]. SPOT FOCUS You can select and adjust the focal point to aim it at a subject not located at the center of the screen. Touch the subject in the frame of which you want to adjust the brightness and focus. It is recommended that you record images under stable conditions (for example, using a tripod). Impact sound may be detected by the internal microphone even when an external microphone is attached. [TIMING] Select the recording start point after START/STOP is pressed. The default setting is [3sec AFTER]. The point when START/STOP is pressed. [3sec AFTER] [3sec BEFORE] Notes You cannot record sound. Image quality is not as good as that of normal recording. 0 US SHOOTING SET (Items for customized shooting) See "Using menus" (p. ACTIVE Provides a more powerful SteadyShot effect. STANDARD Provides the SteadyShot effect under relatively stable recording conditions. / See page 25. SET OFF ( ) The SteadyShot function is not used. Notes If you change the setting of [ STEADYSHOT], the imaging field will also change accordingly. You can magnify images up to 12 times using optical zooming, unless [ STEADYSHOT] is set to [ACTIVE]. REC MODE (Recording mode) See page 25. GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical. Does not display the guide frame. CONVERSION LENS When using a conversion lens (sold separately), use this function to record using the optimum compensation for camera shake and focus for the lens. OFF Select this when you do not use a conversion lens. Customizing your camcorder WIDE CONVERSION ( ) Select this when you use a wide-conversion lens. Tips Positioning the subject at the cross point of the guide frame makes a balanced composition. The outer frame of [GUIDEFRAME] shows the display area of a TV which is not compatible with full pixel display. TELE CONVERSION ( ) Select this when you use a tele-conversion lens. Notes The built-in flash is not flashed when [CONVERSION LENS] is set to other than [OFF], you cannot also set [FLASH MODE] (p. [. . . ] The Active Interface Shoe has a safety device for fixing the installed accessory securely. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory. 113 US When you open or close the shoe cover, slide it as indicated by the arrow. When you are recording movies with an external flash (sold separately) connected to the accessory shoe, turn off the power of the external flash to prevent charging noise being recorded. [. . . ]