User manual HUBBELL LIGHTING R175C (REV.A)

[. . . ] 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. This is where you will find the description of the controls and the internal parts. 14) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. 15) After loading the dishes, you need to select the right wash cycle and measure out the correct dose of detergent and rinse aid. [. . . ] If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting. Warning Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the interior of the appliance. Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container. If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no. In any case, please read the manufacturer's instructions on the packet. If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of cycles. 16 ARISTON DISHWASHER - Instructions for installation and use A wash cycle for every degree of soil Select the right wash cycle D ISHWASHER Salt, rinse aid, the right amount of detergent and the this is the formula to get the best results and to keep shape Note: in the auto wash cycles, the cycles some modifications due to the intervention which evaluates how dirty the dishes are the cycle in accordance. "AUTO" wash cycles This means that your dishwasher is equipped with correct wash cycle: a sensor which evaluate how your dishwasher in dirty your dishes are and allows these wash cycles to adjust automatically, to could undergo provide you with a more of the sensor efficient and economic wash and optimises cycle.  ARISTON DISHWASHER - Instructions for installation and use 17 D ISHWASHER Never Loading the salt. The salt container is situated underneath the lower rack, fill it up as follows: 1. It is vital that you check the outer which the dishwasher is connected hose regularly: if you see it has is sized for the maximum current Cold water connection. Connect the cold water supply you have to replace it as soon as hose to a 3/4 gas threaded possible. Call for an authorised Earth: indispensable connection, taking care to screw it technical engineer to come and safety. Appliance into a socket provided hoses are new or have been out of with an efficient earth connection use for an extended period of time, Drain hose connection. Let the water run to make sure it is Fit the drain pipe into a drain line (the system's earthing is a clear and free of impurities before with a minimum diameter of 4 cm guarantee of safety provided for by making the connection. Avoid law, make sure your system has precaution is not taken, the water restricting or bending it. Inlet could get blocked, causing special plastic elbow provided (see damage to your dishwasher. The part of the pipe On some models, a transparent marked with the letter A should condensation-proof adhesive tape If the power be between 40 and 100 cm above has been provided. It should be stuck onto the lower the appliance is The pipe should not be immersed side of your wooden worktop to connected is not in water. The plug, replace When not provided, this tape can A it with a suitable be requested as a spare part from plug rather than authorised retailers. Using adapters or multiple plugs as these could cause overheating or burns. [. . . ] The food particles are removed from the wash water, allowing it to be recirculated during the cycle, filtered perfectly. For this reason, it is a good idea to remove the larger food particles trapped inside the cup “C” and the semi-circular filter A after each wash; pull the cup handle upwards to remove them. The entire filter assembly should be cleaned thoroughly once a month: cup C + semi-circular filter A + cylindrical filter B. Reassemble the filter parts (as shown in the figure) and reinsert the whole assembly into the dishwasher. [. . . ]