User manual HUBBELL LIGHTING CH-LLR

[. . . ] If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle of inclination, measured according to the worktop, must not exceed 2°. 3. Make sure there are no kinks or bends in the hose.  The water pressure at the tap must be within the values indicated in the Technical details table (on the next page).  If the water inlet hose is not long enough, contact a specialist store or an authorised serviceman. 2 Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;  When the washing machine is installed, the main socket must be within easy reach.  The power supply cable must never be bent or dangerously compressed. [. . . ] To cancel it, keep the START/RESET button pressed for at least 2 seconds. When the programme is finished, the ON-OFF/ DOOR LOCK Led will flash to indicate that the appliance door can be opened. Take out your laundry and leave the appliance door ajar to allow the drum to dry thoroughly. Turn the washing machine off by pressing button . Fabric softener Bleaching Cycle length Description of wash cycle /option (minutes) Bleach Cotton Extremely soiled whites (sheets, tablecloths, etc. ) Extremely soiled whites (sheets, tablecloths, etc. ) Heavily soiled whit es and fast colours Heavily soiled whit es and fast colours Slightly soiled whit es and delicate colours (shirts, jumpers, etc. ) 1 2 3 4 5 90°C 90°C 60°C 40°C 30°C • • • • • • • • • • • 152 Pre-wash, wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse cycles, intermediate and final spin cycles Wash cycle, rinse crease or delicate Wash cycle, rinse crease or delicate cycles, antispin cycle cycles, antispin cycle Delicate/ Traditional Delicate/ Traditional Delicate/ Traditional Delicate/ Traditional 144 159 93 85 Synthetics Heavily soiled fast colours (baby linen, etc. ) Heavily soiled fast colours (baby linen, etc. ) Delicat e colours (all types of slightly soiled garments) Delicat e colours (all types of slightly soiled garments) 6 7 8 9 60°C 50°C 40°C 30°C • • • • • • • • Delicate Delicate Delicate 94 90 80 Wash cycle, rinse cycles, anticrease or delicate spin cycle Wash cycle, rinse cycles and delicate spin cycl Wash cycle, rinse cycles and delicate spin cycle Wash cycle, rinse cycles, anticrease or draining cycle 32 Delicate Wool Very delicate fabrics (curtains, silk, viscose, etc. ) PARTIAL PROGRAMMES Rinse Delicat e rinse cycle Spin cycle Delicat e spin cycle Draining 10 11 40°C 30°C • • • • Delicate 60 67 • • Rinse cycles and spin cycle Rinse cycles, anti-crease or draining Draining and heavy duty spin cycle Draining and delicate spin cycle Draining Notes • For the anti-crease function: see Easy iron, opposite page. • At the end of the wash cycle, before opening the appliance, wait 3 minutes for the doors of the drum to face upwards. Special programme Daily 30' (programme 9 for Synthetics) is designed to wash lightly soiled garments in a short amount of time: it only lasts 30 minutes and allows you to save on both time and energy. By setting this programme (9 at 30°C), you can wash different fabrics together (except for woollen and silk items), with a maximum load of 3 kg. We recommend the use of liquid detergent. 6 Personalisations Setting the temperature GB Installation Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6). Turn the SPIN SPEED knob to set the spin speed for the programme selected. The maximum spin speeds for each programme are as follows: Programmes Cottone Synthetics Wool Silk Maximum spin speed 800 rpm 800 rpm 600 rpm no Setting the spin speed Description . The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for each programme. Programmes Detergents  To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by continuously rotating the drum at a speed which is slightly faster than the normal washing speed. • Do not pull on the power supply cable to unplug the appliance from the electricity socket. • Do not open the detergent dispenser while the appliance is in operation. • Do not touch the drain water as it could reach very high temperatures. • Never force the washing machine door: this could damage the safety lock mechanism designed to prevent any accidental openings. • In the event of a malfunction, do not under any circumstances touch internal parts in order to attempt repairs. • Always keep children well away from the appliance while in operation. • Should it have to be moved, proceed with the help of two or three people and handle it with the utmost care. • Before loading your laundry into the washing machine, make sure the drum is empty. Saving energy and respecting the environment Environmentally-friendly technology If you only see a little water through your appliance door, this is because thanks to the latest Ariston technology, your washing machine only needs less than half the amount of water to get the best results: an objective reached to respect the environment. Saving on detergent, water, energy and time • To avoid wasting resources, the washing machine should be used with a full load. A full load instead of two half loads allows you to save up to 50% on energy. Avoiding it will save on detergent, time, water and between 5 and 15% energy. [. . . ] The START/RESET button has not been pressed. Description The washing machine fails to load water. Programmes The washing machine continuously loads and unloads water. • The drain hose is not fitted between 65 and 100 cm from the floor (see page 3). If the problem persists even after these checks, turn off the water tap, switch the appliance off and call for Assistance. If the dwelling is on one of the upper floors of a building, there may be drain trap problems causing the washing machine to load and unload water continuously. In order to avoid such an inconvenience, special anti-drain trap valves are available in shops. [. . . ]