User manual HUBBELL LIGHTING 570 HID

[. . . ] UCL-SG3: Jet-Phillips SHO/RHO, Guardian MC-1411. Existing Housing Warnings: Read and follow all instructions, electrical data markers, and wiring labels before installation. Installation and maintenance must be performed by a licensed electrician only. [. . . ] Installation and maintenance must be performed by a licensed electrician only. The installer is responsible for safe and secure mounting, suitable for the application. To reduce fire and shock hazards, disconnect power before installation or servicing. Use protective equipment to avoid injury when installing and servicing this product. Provide proper grounding for all system components and use appropriate wire connectors. Hang the retro-fit panel on a side of the housing that is adjacent to the existing ballast. Orient and hang the panel on the housing flange as shown in Figures 1 and 2. Make wiring connections in accordance with applicable codes and the wiring diagram at right. Hinge panel up, while pushing towards the hinges, until the panel is nearly closed against the housing flange. Slide both latch locking screws toward the hinges and close the panel fully against the housing flange. [. . . ] Hinge panel up, while pushing towards the hinges, until the panel is nearly closed against the housing flange. Slide both latch locking screws toward the hinges and close the panel fully against the housing flange. [. . . ]