User manual HTC TOUCH PRO

[. . . ] User Manual www. htc. com Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE'S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your PDA Phone. [. . . ] To use Wi-Fi on your device, you need access to a wireless access point or "hotspot". Note The availability and range of your device's Wi-Fi signal depends on the number, infrastructure, and other objects through which the signal passes. To turn Wi-Fi on and off 1. On the Settings screen, tap Communications > Wi-Fi to enable/disable the wireless function. When enabled, the On indicator is activated and available wireless networks will be detected. To connect to a wireless network After Wi-Fi is turned on, your device scans for available wireless networks in your area. Internet 151 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. On the next pop-up message window, do one of the following: · · Tap The Internet if the wireless network connects your device to the Internet. Tap Work if the wireless network connects your device to a private network. 3. Enter the key and then tap Connect. Next time you use your device to detect wireless networks, you will not see the pop-up message windows again, and you will not be prompted to enter the network key of the previously accessed wireless network (unless you perform a hard reset which will erase custom settings on your device). Note Wi-Fi networks are self-discoverable, which means no additional steps are required for your device to connect to a Wi-Fi network. It may be necessary to provide a username and password for certain closed wireless networks. 15 Internet To check wireless network status You can check the current wireless connection status from any of the following screens of your device: · Title bar. appears on the After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal. Once your device successfully connects to a wireless network, the arrows stop moving. On the Home screen, slide to the Settings tab and then tap Menu > Wireless Networks. On the Main tab, you will see the wireless network that your device is currently connected to. The configuration and signal quality of the wireless network are also shown. Internet 15 · Configure Wireless Networks screen. On the Home screen, slide to the Settings tab and then tap All Settings. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New. To save battery power while connected to a wireless network Using Wi-Fi quickly consumes battery power. On the Settings screen, tap Menu > Wireless Networks > Power Mode tab. On the Power Mode tab, move the Power Save Mode slider to a position that optimizes performance with the least power consumption. [. . . ] 198 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 199 Ministry of Health (Canada), Safety Code . The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. [. . . ]