User manual HP PROCURVE 2510-48

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP PROCURVE 2510-48. We hope that this HP PROCURVE 2510-48 user guide will be useful to you.


HP PROCURVE 2510-48 : Download the complete user guide (1992 Ko)

Manual abstract: user guide HP PROCURVE 2510-48

Detailed instructions for use are in the User's Guide.

[. . . ] Nothing herein should be construed as constituting an additional warranty. Consistent with FAR 12. 211 and 12. 212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U. S. HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide February 2003 (First Edition) Part Number 322857-001 HP CONFIDENTIAL Codename: DeLorean Part Number: 322857-001 Last Saved On: 2/4/03 12:17 PM Contents About This Guide Technician Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Where to Go for Additional Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Telephone Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Chapter 1 Overview Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Additional References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] <vlan_id>--Type the VLAN ID to display the status for a specified VLAN. · dynamic-reg--Type dynamic-reg to display the Dynamic Group Registration Table. This table displays filtering information for VLANs configured into the bridge by local or network management, or learned dynamically. It specifies the set of ports to which frames received on a VLAN for this forwarding database, and containing a specific group destination address, are allowed to be forwarded. HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide 2-23 HP CONFIDENTIAL Codename: DeLorean Part Number: 322857-001 Last Saved On: 2/4/03 12:23 PM Configuring the Switch Modules using the Command Line Interface This example shows the IGMP filter mode. This example shows the IGMP snooping settings for a VLAN. This example shows the IGMP snooping status. This example shows the Dynamic Group Registration Table. 2-24 HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide HP CONFIDENTIAL Codename: DeLorean Part Number: 322857-001 Last Saved On: 2/4/03 12:23 PM Configuring the Switch Modules using the Command Line Interface Configuring Class of Service, Default Port Priority, and Traffic Class Class of Service (CoS) for packet prioritization allows you to set priority levels for forwarding packets based on the priority setting information in the packets. The switch module supports four classes (0-3) of traffic (buffers or queues) per egress port. Traffic from a specific server port can be given priority over packets from other devices according to the range of priority levels. By default, queue 3 has the highest priority setting; queue 0 has the lowest priority setting. You can set the following queue scheduling algorithms: · · Strict Priority Based Scheduling (Strict): If there are any packets residing in the high priority of the transaction, then they are taken up first for transmission. Weighted Priority Based Scheduling (Round-robin): This option provides continuous transmitting packet count at each queue. If the count is used up, the next priority queue is taken up for the transmission. The range of packet count is from 1 to 255 per queue. You can also enable or disable a latency-based limit on a per queue basis. If any packet latency is greater than the maximum latency, the packet is dropped. Spanning Tree Protocol treats a port trunking group as a single link on the switch module level. STP uses the port parameters of the master port in the calculation of port cost and in determining the state of the port trunking group. If two redundant port trunking groups are configured on the switch module, STP blocks one entire group, similar to STP blocking a link in case of two redundant links. 2-28 HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide HP CONFIDENTIAL Codename: DeLorean Part Number: 322857-001 Last Saved On: 2/4/03 12:23 PM Configuring the Switch Modules using the Command Line Interface Considerations when Creating a Port Trunking Group When creating a port trunking group, consider the following rules that determine how the port trunk reacts in network topology: · The first port of the port trunk is implicitly configured to be the master logical port. It can be thought of as the logical port representing the entire group. When using a port trunk, always reference the master logical port of the group when configuring or viewing VLANs. VLANs configured to use other ports in the port trunk will have those ports deleted from the VLAN when the port trunk becomes enabled. The Spanning Tree algorithm views port trunk as a single Spanning Tree port. If the VLAN settings of the master logical port are changed, the VLAN settings of all members of that port trunk are changed similarly. If the IGMP snooping configuration for any port trunk member is changed, the IGMP snooping settings for all port trunk members are changed. That is, the settings of trunked ports are the same as the master port settings. When any trunked port becomes a non-trunked port, all of the port configurations are reset to default settings. · · · · · · · Refer to Appendix G in the HP ProLiant e-Class C-GbE Interconnect Switch User Guide for additional information on port trunking. [. . . ] cfg <path_filename>--Type cfg and the path and filename to use for a configuration file upload or download command. log <path_filename>--Type log and the path and filename to use for a log file upload command. The path name can be from 1 to 64 characters in length. · · Initiating a TFTP Download for Firmware or Configuration File IMPORTANT: Configuration files used in the earlier version of the switch module (firmware version 1. 0. 0) are not supported by the present version (firmware version 2. 0. 0). Refer to the section "Displaying Switch Module Information" for information on how to display the current firmware version. A configuration file can be downloaded from a TFTP server to the switch module. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP PROCURVE 2510-48




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP PROCURVE 2510-48 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.