User manual HP PAVILION 23XI

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP PAVILION 23XI. We hope that this HP PAVILION 23XI user guide will be useful to you.


HP PAVILION 23XI : Download the complete user guide (1129 Ko)

Manual abstract: user guide HP PAVILION 23XI

Detailed instructions for use are in the User's Guide.

[. . . ] 8 cm (20–inch) diagonal viewable area display with 1600 x 900 resolution, plus full-screen support for lower resolutions: includes custom scaling for maximum image size while preserving original aspect ratio 22xi/22bw/20fi models, 54. 5-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio 23xi/23bw/23fi models, 58. 4 cm (23-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio 25xi/25bw model, 63. 5 cm (25-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio 27xi/27bw model, 68. [. . . ] Arrange them so that no one may accidentally step on or trip over them. When unplugging from the electrical outlet, grasp the cord by the plug. 8 Chapter 2 Setting Up the Monitor Front Panel Controls Figure 2-8 Monitor Front Panel Controls NOTE: The front panel controls on the HP 25xi/25bw and HP 27xi/27bw models are inactive unless they are illuminated. To activate the controls, tap on the area where the icons are located. The backlight for the icons will turn off upon exit from the OSD or when the OSD times out. 3 Quick View/Minus This item can only be used with a VGA input If the OSD menu is on, press to navigate backward through the OSD menu and decrease adjustment levels. If the OSD menu is inactive, press to activate the Quick View button that chooses different settings (HP Enhance+, Movie, Photo, Gaming, Text, Custom) 4 Plus/source If the OSD menu is on, press to navigate forward through the OSD menu and increase adjustment levels. If the OSD menu is inactive, press to activate the source button that chooses the video signal input (VGA, DVI, or HDMI) 5 6 OK Power If the OSD menu is on, press to select the highlighted menu item. Front Panel Controls 9 NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www. Adjusting the Monitor Tilt the monitor panel forward or backward to set it to a comfortable eye level. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time. * To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Monitors with a “burned-in image” are not covered under the HP warranty. NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable this feature, press and hold the monitor power button for 10 seconds. Press the Menu button on the front of the monitor, then select Management > Bezel Power LED > Off. When the monitor is powered on, a Monitor Status message is displayed for five seconds. The message shows which input (VGA, DVI, or HDMI) is the current active signal, the status of the auto-switch source setting (On or Off; factory default is On), the default source signal (factory default is Auto-switch), the current preset display resolution, and the recommended preset display resolution. 10 Chapter 2 Setting Up the Monitor The monitor automatically scans the signal inputs for an active input and uses that input for the display. If two or more inputs are active, the monitor will display the default input source. If the default source is not one of the active inputs, then the monitor will display the highest ranking priority input in the following order: DVI, HDMI, then VGA. You can change the default source in the OSD by pressing the front panel Menu button and selecting Source Control > Default Source. [. . . ] 22 Appendix A Technical Specifications Energy Saver Feature The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize 0. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP PAVILION 23XI




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP PAVILION 23XI will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.