User manual HOTPOINT WML 902 EU

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT WML 902 EU. We hope that this HOTPOINT WML 902 EU user guide will be useful to you.


HOTPOINT WML 902 EU : Download the complete user guide (1256 Ko)

Manual abstract: user guide HOTPOINT WML 902 EU

Detailed instructions for use are in the User's Guide.

[. . . ] Instructions for use WASHING MACHINE Contents Installation, 2-3 IT Italiano, 13 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data GB GB English, 1 Care and maintenance, 4 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 5 General safety Disposal WML 902 Description of the washing machine and starting a wash cycle, 6-7 Control panel Indicator lights Starting a wash cycle Wash cycles, 8 Table of wash cycles Personalisation, 9 Setting the temperature Setting the spin speed Functions Detergents and laundry, 10 Detergent dispenser drawer Preparing the laundry Garments requiring special care Load balancing system Troubleshooting, 11 Service, 12 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] DOOR LOCKED indicator light: indicates whether the door may be opened or not (see next page). START/PAUSE button with indicator light: starts or temporarily interrupts the wash cycles. To pause the wash cycle in progress, press this button; the corresponding indicator light will flash orange, while the indicator light for the current wash cycle phase will remain lit in a fixed manner. If the DOOR LOCKED indicator light is switched off, the door may be opened (wait approximately 3 minutes). To start the wash cycle from the point at which it was interrupted, press this button again. Standby mode This washing machine, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again. Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit in a fixed manner, in green. To cancel the set wash cycle, pause the machine by pressing the START/PAUSE button and select a new cycle. The DOOR LOCKED indicator light will switch off, indicating that the door may be opened (wait approximately 3 minutes). Take out your laundry and leave the appliance door ajar to make sure the drum dries completely. 7 Wash cycles GB Table of wash cycles Residual dampness% Max. Load (kg) Energy consumptionkWh Prewash Description of the wash cycle Fabric softener Max. 9 Delicates Fast Wash 60’: to refresh normal soiled garments quickly (not 10 suitable for wool, silk and clothes which require washing by hand). 90°) 60° 40° 60° 40° 60° 40° 40° 30° 60° 20° 1000 1000 1000 1000 1000 1000 1000 1000 1000 800 0 1000 1000       -                 -        -                  - 5 5 9 9 9 4, 5 4, 5 5 5 2 1 3, 5 9 9 3 3 9 9 9 - - 97 65 44 38 - 180’ 180’ 115’ 225’ 135’ 100’ 195’ 145’ 85’ 80’ 60’ 175’ 80’ 70’ 30’ 36’ 10’ 3’ 62 1, 30 57, 4 240’ 62 1, 10 46 1, 03 - 62 0, 84 - 12 Eco Cottons 13 Eco Synthetics 14 Eco Fast 30’ Rinse Spin and Pump out Pump out only * Cold Water 1000 Cold Water 1000 Cold Water 800 1000 1000 71 0, 20 and exclude the spin cycle, the machine will drain only. * If you select programme The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. 1) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 4 with a temperature of 60°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C . 2) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 4 with a temperature of 40°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C . For all Test Institutes: 2) Long wash cycle for cottons: set wash cycle 4 with a temperature of 40°C. [. . . ] If, after several attempts, the load is not balanced correctly, the machine spins at a reduced spin speed. If the load is excessively unbalanced, the washing machine performs the distribution process instead of spinning. To encourage improved load distribution and balance, we recommend small and large garments are mixed in the load. Preparing the laundry • Divide the laundry according to: - the type of fabric/the symbol on the label - the colours: separate coloured garments from whites. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT WML 902 EU




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT WML 902 EU will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.