User manual HOTPOINT TB 060C AX0

[. . . ] This appliance should be used only for preparation of drinks/food as described within the instructions for use that accompany it. Always ensure that your hands are dry before removing the plug from the mains socket. To avoid injury or possible fire, do not cover the appliance when in use. Do not connect this appliance to an external timer or remote control system. [. . . ] To protect against fire, electric shock or personal injury, do not immerse cord, plug or unit in water or other liquids. Do not leave the cable hanging over the edge of a kitchen table or worktop. Make sure motor and steam generator have stopped completely before removing the lid. Do not operate this appliance in the presence of explosive and/or flammable fumes. To reduce the risk of electric shock, do not attempt to open the motor base. Be sure the Base is on a flat, dry and clean sur- BEFORE THE FIRST USE When unpacking the product and removing packing material, handle the blades carefully; they are very sharp. Do not immerse the supply cord part of this appliance in water or any other liquids. Be sure to read this manual, paying special attention to the sections on “Use your steam blender” and “Care and Cleaning” to learn the correct methods for taking the unit apart and cleaning. If the duration time exceed 3 min it will stop automatically In case of power failure, when the power returns the product goes into standby mode. To use the blender function it is necessary to turn the control knob to “0”, press the ‘on / off’ button and then turn the control knob to the desired speed. To fit the Glass Jar Assembly to the base of the Steam blender, position jar unit on the motor base so that the arrow on the jar collar is aligned to the arrow on the base. If the motor stalls, turn the Steam blender off immediately, unplug the unit and carefully remove a portion of the food, then continue. Run a 20 minutes cycle of steam cooking without any food into the jar. Rinse the water circuit with another 20 minutes cycle by using 700ml of pure water. € • • • • • • Always unplug the appliance from the mains socket before cleaning. To clean the anti-stick base we recommend the use of the scrubbing brush which makes it easy to clean underneath the blades. To clean the glass jar lid and measuring cup, wash in hot soapy water. Wipe the motor base clean with a damp cloth to remove any residue, and dry thoroughly. Disposal of old electrical appliances The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. [. . . ] Check that the jar is correctly assembled; it must be screwed till lock position; the jar handle must be on the right, aligned over the water tank Reactivate power; push on/off button to get the product start working. When blending, come back to off position and then re-set desired speed. Follow descaling procedure described below; control that no piece of food is completely clogging the steam flow. If message E1 is still displayed, we recommend disconnecting the power-supply cable and then connecting it again. [. . . ]