User manual HOTPOINT SL D10 BDB

[. . . ] They new high efficiency motors ensure optimal performances with low consumption. The exclusive Trolley Sysyem, with patent pending, combined with the usage of the Remote Power control (if available) ensures the maximal ergonomy and maneuverability around furniture. This appliance was developed for household use only and should not be put to industrial use. Before you begin using the appliance, it is important that you carefully read these instructions and keep them for further reference. [. . . ] FEATURES The electronic power regulator (26) (if available) allows to set the suction power required. On some models, the ideal power levels are indicated, according to the surface to be cleaned: awnings, carpets and hard floors. The Eco function (if available) allows to save 25% energy, compared with the consumption relative to max suction power, ensuring at the same time cleaning efficacy. The Remote power control (if available) enables you to adjust the suction power directly and effortlessly from the hand grip, with no need to bend. When using the vacuum cleaner, you can keep it on standby by pressing the Start & Pause button (22). Insert two AAA batteries, making sure of the positive and negative poles. 17 en it The Trolley System allows you to move your vacuum cleaner easily when cleaning and carry it from room to room effortlessly. Press the opening/closing button on the Trolley System (13) to pull out the carry handle (12) until it locks into place at the desired length. Having completed your cleaning, press the opening/closing button on the Trolley System and close the carrying handle until it locks into place. Use the Trolley System's carrying handle to store the appliance, making sure you have correctly locked it into place. Trolley System (D) CLEANING AND MAINTENANCE Before cleaning or maintaining the vacuum cleaner, make sure it has been unplugged from the electrical outlet. Press the dust-compartment opening button (14) to open the dust compartment lid (15). Dispose of the dust bag in compliance with all local regulations on waste disposal. Slide a new Pure Clean dust bag into the dust bag support completely; then place it back into the special compartment. When cleaning the motor filter grill, remove any dust/powder residues with a small brush. Fit the motor filter into the motor filter grill again, taking care to position it gently into the special notches. Slide the motor filter grill assembly into the special guides in the dust compartment. Cleaning the dust container (J) For the routine cleaning of the dust container: 1. Press the dust-compartment opening button (14) to open the dust compartment (15) and remove the dust container (41). Remove any residual dirt by washing the dust container under running water. Let it dry at room temperature until all its parts are thoroughly dry. Close the dust container lid until it clicks into place and replace it into the dust compartment. [. . . ] Turbo brush (O) Deluxe Parquet brush (P) Upholstery brush (Q) ATTACHMENTS The attachments can either be supplied as standard features (based on the model) or be purchased separately from Hotpoint authorised centres. The Multi brush (3) is suitable for vacuuming hard floor and carpets on a daily basis. The Multi Deluxe brush (1) is designed optimizing the air flow and is especially suitable for vacuuming hard and smooth floors as well as carpets. Use the bristle-adjustment pedal (2) to clean: Hard floors Carpets Precision nozzle (R) Multi brush/Multi Deluxe brush (M/L) The precision nozzle in the attachment compartment (29) helps you vacuum corners, crevices and other difficult-to-reach areas. [. . . ]