User manual HOTPOINT SL B22 AA0

[. . . ] Uk to make sure you are entitled to all the benefits made available by Hotpoint Customer Service. the Trolley Power was designed to ensure optimum performance and consistent usability. The exclusive Trolley System ensures maximum manouverability and helps you move freely around the house without knocking against the furniture. The Remote Power Control (if available) enables you to adjust the suction power directly and effortlessly from the hand grip, with no need to bend. [. . . ] Fit the gasket into the special groove along the perimeter of the dust compartment (38). Eu Do not start the vacuum cleaner if the plastic flexible hose is entangled, as this could damage the appliance. FEATURES Trolley System (B) The Trolley System allows you to move your vacuum cleaner easily when cleaning and carry it from room to room effortlessly. Slide the Pure Clean dust bag into the dust bag support all the way; then place it into the special dust compartment. Container correctly and close the dust compartment lid until it clicks into place. The appliance is equipped with a safety device that prevents the dust compartment lid from closing unless the dust bag / container has been correctly installed. The appliance is equipped with a safety device that prevents the dust compartment lid from closing unless the dust bag / container has been correctly installed. Replacing the Pure Clean dust bag (G) We recommend always using Hotpoint original Pure Clean dust bags, because their special fabric allows optimum air filtration, maximum dust/powder retention, high performances and a long motor life. As the Pure Clean dust bags (34) are made of fabric, they are more resistant than conventional paper bags and can retain very fine dust/powder particles more effectively, thus ensuring maximum hygiene. We recommend replacing the Pure Clean bag as soon as the full-bag indicator illuminates. Change at least once a year to be always sure of the hygienic condition of your vacuum cleaner. Press the dust-compartment opening button (13) to open the dust compartment lid (14). Remove the Pure Clean dust bag (34), motor filter grill (36) and motor filter (35) from the motor filter grill. Clean the motor filter by washing it under running water, taking care that the jet of water is not too strong. When cleaning the motor filter grill, remove any dust/powder residues with a small brush. Fit the motor filter into the motor filter grill again, taking care to position it gently into the special notches. Slide the motor filter grill assembly into the special guides in the dust compartment. The appliance is equipped with a safety device that prevents the dustcompartment lid from closing unless the dust bag has been correctly installed. Do not force the dust bag lid to close and make sure all the parts are in the correct position to allow you to close the lid. Cleaning the dust container (I) model without dust bag For the routine cleaning of the dust container: 1. Let it dry at room temperature until all its parts are thoroughly dry. Fit the pre-filter into the special indentation of the Pure Clean Hepa 13 filter, locking both filters in place using the protection grill. [. . . ] For your safety, never put your hands close to the suction nozzle or rotating brush while operating the appliance. Precision nozzle (P) The precision nozzle in the attachment compartment (28) helps you vacuum corners, crevices and other difficult-to-reach areas. To clean the precision nozzle, remove the nozzle from the metal extension pipe (8) and wipe with a dry or slightly damp soft cloth. Nozzle for delicate surfaces (Q) The nozzle for delicate surfaces in the attachment compartment (28) is suitable for vacuuming surfaces requiring special care such as radiators, furniture etc. [. . . ]