User manual HOTPOINT SL B10 BDW

[. . . ] Never leave the appliance unattended when it is plugged into an electrical outlet. After use, disconnect the plug from the electrical outlet and rewind the power cord. Do not bend the power cord and keep it away from sharp edges to avoid any damage. Never leave or use the appliance over or close to flames, ovens, flammable materials or other sources of heat. [. . . ] Fit the metal extension pipe (9) into the hand grip (10) until it locks into place. Fit the attachment you need (see chapter “Attachments”) into the end of the metal extension pipe until it locks into place. If your appliance is equipped with a Remote Power Control, you will need to insert the batteries supplied (see paragraph “Remote Power Control” under chapter “Features”). USING THE VACUUM CLEANER (A) The appliance is equipped with a safety device that prevents the dust-compartment lid from closing unless the dust bag has been correctly installed. Do not force the dust bag lid to close and make sure all the parts are in the correct position to allow you to close the lid. Do not use the vacuum cleaner without filters, Pure Clean dust bag, dust bag support or dust container, as the appliance could get damaged. Unwind the power cord (34) and plug the appliance into an electrical outlet (220/240V). Do not start the vacuum cleaner if the plastic flexible hose is entangled, as this could damage the appliance. FEATURES Electronic power regulator (B) The electronic power regulator (26) (if available) allows to set the suction power required. On some models, the ideal power levels are indicated, according to the surface to be cleaned: awnings, carpets and hard floors. The Eco function (if available) allows to save 25% energy, compared with the consumption relative to max suction power, ensuring at the same time cleaning efficacy. Start & Pause (E) The Start & Pause function (if available) allows you to keep the vacuum cleaner on stand-by and lock the cleaning head in the park position: just insert the brush into its horizontal housing (30). Air Fresh Hepa 13 (H) The Air Fresh Hepa 13 filter (32) (if available), with active carbons treatment, ensures the maximal dust retention (>99, 95%) and the filtration of odours. CLEANING AND MAINTENANCE Before cleaning or maintaining the vacuum cleaner, make sure it has been unplugged from the electrical outlet. Do not use aggressive substances or abrasive materials to clean the appliance, its internal parts and attachments. We advise you to clean the filter at least every 4 months to restore its filtering power. In any case we recommend replacing the filter at least every year to ensure maximum performance. Cleaning the appliance Use a dry or slightly damp soft cloth to clean the plastic parts (body, dust compartment, flexible hose etc) and the metal extension pipe (9). If you are finding it difficult to close the dust compartment lid, it is likely that the Pure Clean dust bag and/or its dust bag support have not been assembled correctly. Do not force the dust bag lid to close, make sure both parts are in 17 en it the correct position to allow lid closure. Multi brush/Multi Deluxe brush (J/I) The Multi brush (3) is suitable for vacuuming hard floor and carpets on a daily basis. The Multi Deluxe brush (1) is designed optimizing the air flow and is especially suitable for vacuuming hard and smooth floors as well as carpets. [. . . ] The reason is that the Pure Clean dust bag is able to retain very fine dust/powder particles, thus ensuring maximum hygiene. Make sure the expansion pipe, flexible hose and brush are not blocked. Make sure the expansion pipe, flexible hose and brush are not blocked. The batteries were positioned incorrectly inside the battery compartment. [. . . ]