User manual HOTPOINT SI DC30 BA0

[. . . ] € Never leave the appliance unattended when the plug is connected into the electrical socket. € After each use of the appliance, when filling and emptying the water reservoir, as well as when cleaning the appliance, set the steam regulator to Off. Then place the appliance in a stable position, using the stand, and disconnect the plug from the electrical socket. € The appliance must be used and placed on a stable, flat horizontal surface. [. . . ] In case of very delicate fabrics, such as silk, wool, and synthetic materials, iron the garment inside out to prevent shiny marks. Start ironing the garments that require a lower temperature, such as synthetic fabrics. gARMENT LABEL FABRIC TYPE synthetic silk mixed cotton wool mixed wool cotton linen jeans T E M P E R AT U R E INDICATION STEAM INDICATION 4. USING THE IRON In order to make reading this instructions manual easier and identify the model of your Quick Perfect iron, refer to the graphics on page II. Your iron is supplied with Power Off System safety device which automatically switches the iron off when it is left unattended or tips over and ensures maximum safety. Select the steam level with the steam regulator (3) or move it to Off to iron without steam. When steam ironing, make sure that the water level in the reservoir is at least ¼. 24 en it Selecting the temperature and adjusting the steam (B2) 1. If you go from a lower temperature to a higher temperature, the temperature indicator light (4c) light up until the selected temperature is reached. When the iron reaches the set temperature, an acoustic signal is emitted and the temperature indicator light goes off. We recommend to check the garment label in order to identify the fabric type. In particular: • • the iron switches off automatically after 30 seconds when left unattended in the ironing position or sideways; the iron switches off automatically after 10 minutes when left unattended in the rest position (vertical). FEATURES Spray function (F) The spray function is used to dampen the garment in order to remove persistent wrinkles easily. You can use the spray function both in no-steam and steam ironing mode at any temperature. With the iron in horizontal position, press the spray button (2) to dampen the garment. If you leave the iron unattended, the display flashes a green light and an acoustic signal is emitted to inform that the automatic stand-by function is active. Simply move the iron or press the temperature buttons +/- (4a) to switch it back on. automatic switch-off function (H2) The automatic switch-off function guarantees total safety. This function automatically switches off the iron when it is not used for a few minutes. In particular: • • the iron switches off automatically after 30 seconds when left unattended in the ironing position or sideways; the iron switches off automatically after 10 minutes when left unattended in the rest position (vertical). vertical steam function (G) The vertical steam function is useful to eliminate wrinkles from hanging garments , curtains , etc. You can use this function by simply placing the iron in vertical position. [. . . ] TIPS If your Compact Generator is not equipped with the Optimal Soleplate Temperature technology, you may find the following tips useful. € • • Sort the garments out according to the fabric types. This will reduce the need to adjust the temperature according to the different fabrics. Start with the garments that require a low ironing temperature and continue with the garments requiring higher ironing temperatures. [. . . ]