User manual HOTPOINT SI C35 CKG

[. . . ] Disconnect the plug from the socket by holding the plug, and not by pulling the cable. The iron, water and steam coming out of the plate are extremely hot and can burn the INTRODUCTION Thank you for purchasing our steam iron. In doing so, you have opted for an effective high-performance appliance. Uk to make sure you are entitled to all benefits made available by Hotpoint’s Customer Service. [. . . ] When switching on the iron for the first time, you may notice an unpleasant odour, a little smoke and some impurities that will disappear in a few minutes. When using the steam function for the first time, do not direct the steam jet on the garments because of the possible presence of manufacturing residues in the steam dispenser. Never add any perfume, vinegar, starch, scale-removing agents, ironing products or other chemicals in the water reservoir - unless recommended by Hotpoint-Ariston. Never use contaminated water or coming from driers, accumulators or air conditioners. We recommend to check the garment label in order to identify the fabric type. In case of doubts, it is recommended not to use the spray function and iron a hidden corner in order to determine the most appropriate temperature and avoid damaging the fabric. In case of very delicate fabrics, such as silk, wool, and synthetic materials, iron the garment inside out to prevent shiny marks. Start ironing the garments that require a lower temperature, such as synthetic fabrics. FABRIC TYPE TEMPERATURE INDICATION MIN STEAM INDICATION GARMENT LABEL synthetic silk mixed cotton wool mixed wool cotton linen jeans Filling the water reservoir (A) We recommend using demineralised water. Before filling the iron with water, make sure that the iron is switched-off and disconnected from the electrical socket. Open the lid of the filler hole (15) and fill the water reservoir using the water measurer supplied with the iron. You can use this function by simply placing the iron in vertical position. All functions of the appliance will remain unchanged also in this position (refer to chapter “Use” according to the model). Do not direct steam towards people or animals and do not iron garments while Cleaning (J) Never use aggressive and/or abrasive substances to clean the plastic parts and the iron soleplate. Set the steam regulator (3) to Off, disconnect the appliance plug from the electrical socket and let the iron cool down. Use a dry or slightly dampened soft cloth to clean the upper part of the iron. For the ordinary cleaning and/or removal of stains or other residues deposited on the plate, clean with a dampened soft cloth and dry. Use a dampened cotton tip to eliminate scale in the steam holes that may impair the performance of your iron. Anti-drip function The iron is provided with anti-drip function in order to automatically interrupt the steam distribution when the temperature is too low, thus preventing water dripping out of the soleplate. Do not use steam with low temperatures (see chart in step B1 and B2, chapter “Using the iron”, according to the type of iron you are using). 23 en it In order to keep the soleplate perfectly smooth and polished, avoid contacts with metal objects, do not iron sharp objects, such as buttons, studs and hinges in order to avoid scratching the plate. TIPS If your Compact Generator is not equipped with the Optimal Soleplate Temperature technology, you may find the following tips useful. [. . . ] Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. Steam and boiling water will come out of the soleplate with scale residues and other impurities. Slide the iron gently on a cloth to eliminate any stains from the soleplate. Before using the iron again, press the shot of steam button (1) repeatedly to eliminate any scale residues. [. . . ]