User manual HOTPOINT SG C11 CKG

[. . . ] This symbol warns operators that surfaces are liable to get hot during use and can burn your skin. Power cord holder Temperature indicator light Iron Soleplate Iron supporting base Boiler Boiler closing cap Water reservoir Cord-rewinding clip Electric power cord Steam cable Steam button Continious steam button No-water indicator light On/Off knob Steam Ready indicator light On indicator light Filter Temperature control clothing and household laundry. When using an extension cord, make sure that a grounded socket is available. €¢ When cleaning the appliance, make sure it has been unplugged from the socket. [. . . ] Select the appropriate steam setting by means of the ON/OFF knob (16) in position to iron with steam or in position to iron without steam. As soon as the selected steam quantity is available, the Steam Ready indicator light (16) will turn on. Proportion 1:0 1:0, 5 1:1 1:2 1:3 0:1 GARMENT LABEL FABRIC TYPE TEMPERATURE INDICATION STEAM INDICATION synthetic silk mixed cotton wool mixed wool cotton linen jeans MIN Min Min To determine the hardness degree of the water in your area, contact your local water board or body. This data is sometimes available on the board/body's website too. MAX Filling the water reservoir (A) Before every use and every time the no-water indicator light turns on, fill the water reservoir: 1. When filling the reservoir, make sure the maximum level shown on the reservoir is not exceeded. Re-place the water reservoir in the relevant USING THE APPLIANCE When you switch on the steam generator for the first time, you may notice an unpleasant smell, a little smoke and some impurities. Select the recommended ironing temperature using the temperature control (19) - (see step B, chapter “Temperature selection and steam adjustment”). Eco function (G) Your generator is equipped with an Eco function that allows energy savings of energy and water compared to normal consumption in terms of maximum steam level. This function automatically switches off the steam generator when it is not used for a few minutes. In particular, your steam generator will automatically switch off after 10 minutes if it is left unused. If you leave the steam generator unattended, a buzzer will sound to inform you that the automatic switch-off function is active. Wait for the Steam Ready indicator light to turn on again and for the temperature indicator light to turn off before start ironing again. Select the recommended ironing temperatura by using the temperature selector (19) (see step B, chapter “Temperature selection”) 4. We recommend using the steam button function when the temperature is higher than. Wait for the temperature indicator light to turn off and for the Steam Ready indicator light to turn on, before pressing the steam button. Ironing with continuous steam (E) The continuous steam function is useful to iron out any persistent wrinkles through a uniform emission of steam onto the fabrics. Select the recommended ironing temperature using the temperature control (19) - see step B, chapter “Temperature selection”. Press the continuous steam button (13) and activate the slider on the button in order to get a continuous steam flow when ironing. We recommend using the continuous steam button when the temperature is higher than . Wait for the temperature indicator light to turn off and for the Steam Ready indicator light to turn on, before pressing the steam button. Disconnect the appliance plug from the electrical socket and let the steam generator cool down. [. . . ] The plate temperature may be too low because the steam button has been activated too frequently. We recommend using these functions at temperatures higher than ●●●. Clean the soleplate - see chapter “Cleaning and maintenance” under paragraph “Cleaning”. You can use starch directly on the reverse side of the fabrics and in any case never in the water reservoir. [. . . ]