User manual HOTPOINT RPG 92 7 JS IL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT RPG 92 7 JS IL. We hope that this HOTPOINT RPG 92 7 JS IL user guide will be useful to you.


HOTPOINT RPG 92 7 JS IL : Download the complete user guide (1738 Ko)

Manual abstract: user guide HOTPOINT RPG 92 7 JS IL

Detailed instructions for use are in the User's Guide.

[. . . ] ‫הוראות שימוש‬ ‫מכונת כביסה‬ ‫תוכן עניינים‬ ‫‪HE‬‬ ‫עברית, 1‬ ‫‪HE‬‬ ‫‪GB‬‬ ‫31, ‪English‬‬ ‫התקנה, 3-2‬ ‫הוצאה מהאריזה ואיזון‬ ‫חיבור החשמל ואספקת מים‬ ‫מחזור כביסה ראשון‬ ‫נתונים טכניים‬ ‫טיפול ותחזוקה, 4‬ ‫ניתוק אספקת המים והחשמל‬ ‫ניקוי מכונת הכביסה‬ ‫ניקוי מגירת חומרי הניקוי‬ ‫טיפול בדלת ובתוף של המכשיר‬ ‫ניקוי המשאבה‬ ‫בדיקת צינור כניסת המים‬ ‫אמצעי זהירות וטיפים, 5‬ ‫בטיחות כללית‬ ‫השלכה‬ ‫פתיחה ידנית של הדלת‬ ‫‪RPG 92 7 J‬‬ ‫תיאור מכונת הכביסה, 7-6‬ ‫לוח בקרה‬ ‫תצוגה‬ ‫הפעלת מחזור כביסה, 8‬ ‫מחזורי כביסה ואפשרויות, 9‬ ‫טבלת תוכניות ומחזורי כביסה‬ ‫אפשרויות כביסה‬ ‫מגירת חומרי ניקוי‬ ‫הכנת הכביסה‬ ‫מחזורי כביסה מיוחדים‬ ‫מערכת איזון עומסים‬ ‫חומרי ניקוי וכביסה, 01‬ ‫פתרון בעיות, 11‬ ‫שירות, 21‬ ‫1‬ ‫התקנה‬ ‫‪HE‬‬ ‫!יש לשמור מדריך זה במקום בטוח לעיון בעתיד. ‬ ‫במקרה של מכירה, העברה או הזזה של מכונת‬ ‫הכביסה, יש לוודא שהמדריך נשאר עם המכונה, ‬ ‫כך שהבעלים החדש יוכל ללמוד את ההפעלה ואת‬ ‫התכונות. ‬ ‫!יש לקרוא הוראות אלה בקפידה: הן כוללות מידע‬ ‫חשוב בנוגע להתקנה ולהפעלה בטוחות של המכשיר. ‬ ‫איזון נכון של המכונה יספק לה יציבות, יעזור למנוע‬ ‫רעידות ורעש חריג, וימנע תזוזה שלה במהלך‬ ‫ההפעלה. במקרה של הצבת המכונה על שטיח או‬ ‫מחצלת, יש לכוון את הרגליים באופן שיאפשר מרווח‬ ‫אוורור מספיק מתחת למכונת הכביסה. ‬ ‫חיבור החשמל ואספקת מים‬ ‫חיבור צינור כניסת המים‬ ‫1. [. . . ] If the inlet hose is not long enough, contact a specialised shop or an authorised technician. Use the ones supplied with the machine. Connecting the drain hose Connect the drain hose, without bending it, to a drain duct or a wall drain situated between 65 and 100 cm from the floor; 65 - 100 cm !When the washing machine has been installed, the electricity socket must remain within easy reach. The power supply cable must only be replaced by authorised technicians. The company shall not be held responsible in the event that these standards are not observed. GB alternatively, placed it over the edge of a basin, sink or tub, fastening the duct supplied to the tap (see figure). We advise against the use of hose extensions; if it is absolutely necessary, the extension must have the same diameter as the original hose and must not exceed 150 cm in length. The first wash cycle Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry, using wash cycle number auto clean (see “Cleaning the washing machine”). Technical data Model Dimensions Capacity RPG 92 7 J width 59. 5 cm height 85 cm depth 60, 5 cm from 1 to 9 kg Electrical connections Before plugging the appliance into the electricity socket, make sure that: • the socket is earthed and complies with all applicable laws; • the socket is able to withstand the maximum power load of the appliance as indicated in the Technical data table (see opposite); • the power supply voltage falls within the values indicated in the Technical data table (see opposite); • the socket is compatible with the plug of the washing machine. The washing machine must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain, storms and other weather conditions. please refer to the technical Electrical data plate fixed to the maconnections chine maximum pressure 1 MPa (10 bar) Water conminimum pressure nections 0. 05 MPa (0. 5 bar) drum capacity 62 litres Spin speed up to 1200 rotations per minute Test wash cycles in accordance programme 9 ; Eco Cotton (60°). 1061/2010 1015/2010 This appliance conforms to the following EC Directives: - EMC - 2014/30/EU (Electromagnetic Compatibility) - LVD - 2014/35/EU (Low Voltage) - 2012/19/EU (WEEE) 60°/40° 60°/40° 15 Care and maintenance GB Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Unplug the washing machine when cleaning it and during all maintenance work. Caring for the door and drum of your appliance • Always leave the porthole door ajar in order to prevent unpleasant odours from forming. Cleaning the pump The washing machine is fitted with a selfcleaning pump which does not require any maintenance. Sometimes, small items (such as coins or buttons) may fall into the pre-chamber which protects the pump, situated in its bottom part. using a screwdriver, remove the cover panel on the lower front part of the washing machine (see figure); Cleaning the washing machine • The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. • The washing machine has a auto clean programme for its internal parts that must be run with no load in the drum. To help the wash cycle A B you may want to use either the detergent (i. e. a quantity 10% the quantity specified for lightly-soiled garments) or special additives to clean the washing machine. To start the programme press buttons A and B simultaneously for 5 seconds (see figure). The programme will start automatically and will run for about 70 minutes. unscrew the lid by rotating it anticlockwise (see figure): a little water may trickle out. This is perfectly normal; Cleaning the detergent dispenser drawer 1 2 Remove the dispenser by raising it and pulling it out (see figure). Wash it under running water; this operation should be repeated frequently. 3. reposition the panel, making sure the hooks are securely in place before you push it onto the appliance. Checking the water inlet hose Check the inlet hose at least once a year. [. . . ] Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. GB Problem: The washing machine does not switch on. The wash cycle does not start. Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. • A delayed start has been set. The washing machine does not fill • The water inlet hose is not connected to the tap. with water (the text “H2O” flashes • The hose is bent. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT RPG 92 7 JS IL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT RPG 92 7 JS IL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.