User manual HOTPOINT PA 200I EBK0

[. . . ] SAFETY TIPS WHEN INSTALLING THE APPLIANCE Install or locate this hob only in accordance with the installation instructions provided. €¢ If this equipment is covered or touching flammable material, including curtains, drapes items with a similar nature there is a risk of fire during the use. €¢ The appliance is not intended to be operated by means of an external timer or separate 9 IMPORTANT INFORMATION FOR YOUR SAFETY GENERAL INFORMATION Your appliance is designed for standard household use for cooking, reheating foods and liquids. SAFETY TIPS WHEN USING THE APPLIANCE The appliance and its accessible parts become hot during use. [. . . ] 5 to 18 cm Safety pack • • • • • Over-temperature protection. If the temperature inside the induction cooker body is too high, the appliance will stop heating. When voltage is abnormal or current changes abruptly, the induction cooker will stop. Once the issues are solved, the induction cooker will work again normally. If a pot is moved during process, the unit will stop heating immediately. The appliance will emit a sound and after 1 minute it will automatically return to standby mode. When the time selected is reached, the induction cooker will shut off automatically until the user triggers the timer again. This pad allows locking all the control panel to simplify the cleaning but also to preserve children from all risks. USING YOUR APPLIANCE Use the control panel • • The sensitive pads work with a sense of touch. Use the base of your finger and not the tip Starting your appliance • Suitable and unsuitable pots and containers It’s necessary to use suitable pots and containers. Pan test with a magnet: if the magnet “sticks” to the base of the pan, then it is suitable for use with induction cooking. requirement for pot materials: containing magnetic induction materials. All the test and authentication of thus product is based on the stainless steel 430 cookware (bottom diameter 180+/- 10mm). The other cookware can not guarantee the best results and performance. After the power supply is connected, the buzzer sounds and the screen show “L” blinking, indicating that the hotplate is in a state of standby. So that the appliance is ready to be programmed, press on On/standby (13). Never put an empty container on the ceramic plate before switching on the appliance. Under the standby mode, if no function button is pressed for about 10 seconds, the induction cooker will switch off automatically. Under the working mode, if there is no proper pot on the ceramic plate, the induction cooker will switch off automatically after 60 seconds. 11 en it Power function In order to select the power intensity you can: • Either press the + (14) or – (15) buttons • Or select it thanks to the slider, by swiping your finger from left to right on the button. Boost mode The boost button (12) allows obtaining directly the highest power level. By pressing again the boost button (12) the appliance will go back to the power level 5. [. . . ] Regarding the air entry and the air vent After a long time of use, some dust or other dirt may be accumulated at the air entry or air vent. The body of the 12 en it appliance can be cleaned with caution with a dry cloth. Never immerse the induction cooker in the water and do not maintain it with a steam cleaner. Troubleshooting PROBLEMS Here are the recommended inspections of common failures: POINTS TO CHECK After the plug in the socket, the indicator (1) and the Make sure that the plug is inserted tightly. [. . . ]