User manual HOTPOINT LTF 11S111 EU

[. . . ] Eco* Partenza Ritardata – Tabs – Extra Dry Partenza Ritardata – Tabs – Extra Dry – Zone wash Short Time Partenza Ritardata – Tabs – Extra Dry – Zone wash Short Time Partenza Ritardata – Tabs 2. 14 Operating instructions DISHWASHER EN English, 15 Contents Precautions, advice and Assistance, 16-17 General safety Disposal Saving energy and respecting the environment Assistance EN Installation, 18-19 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Ecodesign Regulation Description of the appliance, 20 Overall view Control panel LTF 11S111 Loading the racks, 21-22 Lower rack Upper rack Adjusting upper rack Third rack Start-up and use, 23 Starting the dishwasher Measuring out the detergent Wash cycles, 24 Table of wash cycles Special wash cycles and Options, 25 Rinse aid and refined salt, 26 Measuring out the rinse aid Measuring out the refined salt Care and maintenance, 27 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Troubleshooting, 28 15 Precautions, advice and Assistance EN This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. Please read these instructions carefully: they contain important information on installation, use and safety. [. . . ] To open the detergent dispenser use the opening device “A”. Open the door and press ON-OFF button: the ON/OFF indicator lights, options and the display come on. Select the wash cycle in accordance with the type of crockery and its soil level (see table of wash cycles) by pressing the P button. The end of the wash cycle is indicated by beeps and by the flashing of the wash cycle number on the display. Open the door, switch off the appliance by pressing the ON/OFF button, shut off the water tap and unplug the appliance from the electricity socket. Wait for a few minutes before removing the crockery, in order to avoid burns. EN - The machine will switch off automatically during certain extended periods of inactivity, in order to minimise electricity consumption. AUTO WASH CYCLES*:some models of dishwashers are equipped with a special sensor which can be used to assess the level of soiling and automatically setting the most efficient and economic wash cycle accordingly. The duration of the Auto wash cycles may vary due to the operation of the sensor. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. Introduce the detergent into the dry dispenser “B” only. Place the amount of detergent for pre-washing directly inside the tub. When measuring out the detergent refer to the Table of wash cycles to add the proper quantity. Compartment B comprises a level showing the maximum quantity of liquid or powder detergent that can be added to each cycle. Remove detergent residues from the edges of the dispenser and close the cover until it clicks. Close the lid of the detergent dispenser by pulling it up until the closing device is secured in place. The detergent dispenser automatically opens up at the right time according to the wash cycle. If all-in-one detergents are used, we recommend using the TABS option, because it adjusts the cycle so that the best washing and drying results are always achieved. Only use detergent which has been specifically designed for dishwashers. Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended. The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option. To achieve the best results from each washing and drying cycle, powder detergent, liquid rinse aid and salt should be used. [. . . ] After cleaning the filters, re-place the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher. Leaving the machine unused for extended periods If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher. - Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water. [. . . ]