User manual HOTPOINT KIA 641 C

[. . . ] 24 Operating Instructions HOB Contents Installation, 26-28 Positioning Electrical connection GB IT Italiano, 1 FR Français, 13 GB English, 25 Description of the appliance, 29 Control panel DE Deutsch, 37 ES Espanol, 49 KIA 641 C KIC 641 X KIC 642 C KIC 644 X KIC 644 DD Z Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Practical cooking advice Start-up and use, 30-33 General safety Disposal Precautions and tips, 34 Care and maintenance, 35 Switching the appliance off Cleaning the appliance Disassembling the hob Technical description of the models, 36 Installation GB this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.  The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property. [. . . ] To display the time remaining for the other programmed hotplates, press the button repeatedly. The times remaining for each hotplate will be shown in a clockwise order, beginning with the front left hotplate. Use the button repeatedly until the duration buttons to set the new duration. Booster function* The booster function for some of the cooking zones may be used to shorten heating-up times. This function boosts the power to 2000 W or 3000 W, depending on the size of the relevant cooking zone. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. At step 2, press the duration decreases progressively until it reaches 0 and switches off. - • Press and hold the button: the simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. Release the press the button; + and buttons GB Timer The hob must be switched on. Press the programming button until the timer indicator light is illuminated. Confirm by pressing the + and buttons and • The display will show the text DE and MO and the hob will be switched off. • When the hob is switched on again it will be set to the “demo” mode. The display will show the text DE and OF and the hob will be switched off. Practical advice on using the appliance  Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. SUITABLE UNSUITABLE Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. This indicator signals which cooking zones are still at a high temperature. [. . . ] It is designed not to create interference on any other electrical apparatus being used on condition that the apparatus in question also complies with this legislation. To avoid any interference between your induction hob and a pacemaker, the latter must be designed to comply with relevant regulations. Please consult the pacemaker manufacturer or your doctor concerning its conformity or any possible incompatibility. Disposal • When disposing of packaging material: observe local legislation so that the packaging may be reused. [. . . ]