User manual HOTPOINT II DC60 AA0

[. . . ] Do not direct steam towards people or animals and do not iron garments while worn. After use, store the appliance in a stable position using the special pad supplied. Never add any perfume, vinegar, starch, scale-removing agents, ironing products or other chemicals in the water reservoir - unless recommended by Hotpoint-Ariston. Do not leave the appliance in the open air and exposed to inclement weather conditions. [. . . ] Make sure that all adhesive parts have been removed from the soleplate using a damp soft cloth and remove any residues or particles from the manufacturing process by repeatedly filling and emptying the water reservoir. When you switch on the Compact Generator Do not use the steam function with no water in the reservoir to prevent any damage to the pump. €¢ Do not fill the water reservoir by holding the appliance directly under the tap. 19 en it for the first time, you may notice an unpleasant smell, a little smoke and some impurities. When using the steam function for the first time, do not direct the steam jet on the garments because manufacturing residues may be present in the steam dispenser. In the version with no Optimal Soleplate Temperature technology, follow the instructions below. When the Compact Generator has been switched on, a buzzer will sound and the temperature indicator will light up (8). If you go from a lower temperature to a higher temperature, the temperature indicator lights up to show that the Compact Generator is warming up. Once the Compact Generator has reached the set temperature, the temperature indicator light goes off. If in doubt, iron a hidden part in order to determine the most appropriate temperature and avoid damaging the fabric. In case of very delicate fabrics such as silk, wool and synthetic materials, iron the garment inside out to prevent any shiny marks. Press the shot-of-steam button (1) to get an extra steam flow when ironing. Wait for the temperature indicator light to go off before pressing the shot-of-steam button. Cleaning the iron (I) Never use aggressive and/or abrasive products to clean the plastic parts and the iron soleplate. Disconnect the iron plug from the electrical socket and let the Compact Generator cool down. Clean the upper section of the Compact Generator with a slightly dampened soft cloth; then wipe it dry. For routine cleaning and/or the removal of stains or other residues deposited on the soleplate, use a damp soft cloth and dry. Use a damp cotton tip to remove any scale in the steam holes that may impair the performance of your Compact Generator. FEATURES Vertical steam function (G) The vertical steam function is useful to eliminate any creases from hanging garments, curtains etc. To use this function just place the Compact Generator in a vertical position. All the functions of the Compact Generator will remain unchanged in this position refer to chapter “Using the iron”. In order to keep the soleplate perfectly smooth and polished, avoid any contact with metal objects and do not iron sharp objects such as buttons, studs and hinges - they may scratch the plate. [. . . ] Never iron areas with obvious perspiration marks because the heat will fix the stains and make them permanent. €¢ • • DISPOSAL OF OLD ELECTRICAL APPLIANCES The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. [. . . ]