User manual HOTPOINT HB 0705 AC0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT HB 0705 AC0. We hope that this HOTPOINT HB 0705 AC0 user guide will be useful to you.


HOTPOINT HB 0705 AC0 : Download the complete user guide (5403 Ko)

Manual abstract: user guide HOTPOINT HB 0705 AC0

Detailed instructions for use are in the User's Guide.

[. . . ] Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return the appliance to an authorized service facility for examination, repair, or electrical or mechanical adjustment. En it • Do not leave the appliance unattended while it is running. Always hold the blade attachments away from the cutting edges, both when handling and cleaning the unit. [. . . ] To assemble the blender attachment to the motor unit, turn the stem clockwise until tightened. Usually a certain amount of water has to be added to facilitate smooth running, the proportion of food and water being 2:3. Lower the hand blender into the food and rotate the speed-adjusting dial to select the desired speed. Pressing and holding the ON/OFF button, the blender starts blending immediately. USING THE FOOD PROCESSOR ATTACHMENT (D) To use the chopping bowl (only on some models): 1. First of all make sure the non-slip ring is fixed to the bottom of the bowl. Fit the knife blade on the pin in the bowl - always fit the knife blade before adding the ingredients. A small amount of water can facilitate the smooth running of the appliance. Align the two fasteners of the bowl lid with the two clip positions of the bowl and push down to lock them in place. USE THE WHISK ATTACHMENT (only on some models) (B) The whisk attachment is mainly suitable for whisking egg whites. To assemble the whisk attachment to the motor unit, turn the stem clockwise until tightened. Lower the whisk into the food and rotate the speed-adjusting dial to select the desired speed. Pressing and holding the ON/OFF button, the attachment starts whisking immediately. The fasteners must be locked in the two clip positions, otherwise during operating the bowl lid may rotate as the motor rotates. Make sure the food pusher is properly fitted into its housing on the cover. Assemble the motor unit into the bowl lid and turn it clockwise to lock them. Pressing and holding the ON/ OFF button, the attachment starts chopping immediately. First of all make sure the non-slip ring is fixed to the bottom of the bowl. Fit the knife blade on the pin in the bowl - always fit the knife blade before adding the ingredients. A small amount of water can facilitate the smooth running of the appliance. Hard chocolate), ice or frozen foods when using fine chopping attachments. Assemble the motor unit into the bowl lid and turn it clockwise to lock them. [. . . ] Use the slicing side for food items such as carrots, potatoes, cabbages, cucumbers, courgettes and onions. TIP For quick cleaning between processing tasks, fill the cup or bowl with water halfway, assemble the hand-held blender according to the description in the operation section and start the blending / chopping function for a few seconds. Disposal of old electrical appliances The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT HB 0705 AC0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT HB 0705 AC0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.