User manual HOTPOINT HB 0603 DSL0

[. . . ] Do not operate any on or taking off parts, appliance with a and before cleaning. Damaged cord or plug always disconnect the or after the appliance blender from the supply malfunctions, or is if it is left unattended dropped or damaged and before assembling, in any manner. Return disassembling or appliance to the nearest IMPORTANT INFORMATION ON SAFETY 9 en it cleaning; 6. [. . . ] USING THE BLENDER (A) Attention: Blades are very sharp, handle with care. Ensure that the hand-held blender is unplugged from the power outlet before assembling or removing the attachments. Attention: Max operation time with load cannot exceed 1 minute, and a 3 minutes rest time must be respected after two consecutive cycles. To assemble the detachable shaft with the motor unit, turn the shaft anti-clockwise direction until tightened. At the same time you can select desired speed setting by dialing the speed control dial and the speed will increase gradually when you dial the speed control dial from right to left. To start operating by pressing and hold the TURBO button is possible as well:, the appliance will operate at the highest speed all the time. Note: When operating by the TURBO button, the speed will not change even if you operate the speed control dial. USING THE CHOPPER ATTACHMENT (ONLY ON SOME MODELS) (B) Caution: Maximum operation duration per time cannot exceed 1 minute, and a 3 minutes rest time must be observed after two consecutive cycles. Assemble the stainless chopping blade into the chopper bowl, as shown in Fig. Note: Remove the bone of the meat, cut small pieces, then place the meat into the bowl. Assembly the lid onto the chopper bowl Insert the motor unit into the hole of the chopper lid, and turn in clockwise direction to lock. At the same time you can select desired speed setting by dialing the speed control dial and the speed will increase gradually when you dial the speed control dial from right to left. To start operating by pressing and hold the TURBO button is possible as well:, the appliance will operate at the highest speed all the time. 11 en it Note: When operating by the TURBO button, the speed will not change even if you operate the speed control dial. Unplug the power outlet firstly, then remove the motor unit from the chopper lid by turning it anticlockwise. Caution: To reduce the risk of injury, never place cutting blade on base without first putting bowl properly in place. Caution: Be sure the chopper lid is securely locked before operating appliance. Caution: After chopping you shall disassemble the motor unit from the chopper lid firstly, then remove the chopper lid. [. . . ] Stop the hand-held blender by releasing the START button or the TURBO button. The European Directive 2012/19/UE on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. [. . . ]