User manual HOTPOINT FZ 830.1 IX NE /HA

[. . . ] Operating Instructions OVEN Contents GB English, 1 GB DK Dansk, 12 NO Norsk, 23 Installation, 2-3 Positioning Electrical connections Description of the appliance, 4 Overall view Control panel FI Suomi, 34 SE Svenska, 45 Start-up and use, 5 Starting the oven Data plate The electronic cooking programmer, 6 Cooking modes Practical cooking advice Cooking advice table Cooking modes, 7-9 FZ 830. 1 NE/HA Precautions and tips, 10 General safety Disposal Respecting and conserving the environment Assistance Maintenance and care, 11 Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Installation GB  Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Ventilation To ensure good ventilation, the back panel of the cabinet must be removed. [. . . ] • Press and hold the “+” and “-” buttons; this will cancel all the settings selected previously, including timer settings. INCREASE TIME button Setting the clock  The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously. After the appliance has been connected to the mains, or after a blackout, the icon and the four numerical digits on the DISPLAY will begin to flash. Press the button several times until the icon and the four digits on the display begin to flash. Use the “+” and “-” buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Button again Setting the timer  This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. Press the button several times until the icon and the three digits on the display begin to flash. Use the “+” and “-” buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the button again to finalise the setting. A temperature value can be set for all cooking modes between 60°C and Max, except for • BARBECUE (recommended: set only to MAX power level); • GRATIN (recommended: do not exceed 200°C). LEAVENING mode The oven reaches and maintains a temperature of 40°C irrespective of the position of the THERMOSTAT knob. TRADITIONAL OVEN mode Both the top and bottom heating elements will come on. With this traditional cooking mode, it is best to use one cooking rack only: if more than one rack is used, the heat distribution will be uneven. BAKING mode The rear heating element and the fan come on, guaranteeing the distribution of heat delicately and uniformly throughout the oven. This mode is ideal for baking and cooking temperature sensitive foods such as cakes that need to rise and to prepare certain tartlets on 3 shelves simultaneously. FAST COOKING mode The heating elements and the fan come on, guaranteeing the distribution of heat consistently and uniformly throughout the oven. This mode is especially recommended for cooking pre-packed food quickly (frozen or pre-cooked). MULTI-COOKING mode All the heating elements (top, bottom and circular), as well as the fan, will come on. Since the heat remains constant throughout the oven, the air cooks and browns food uniformly. pIZZA mode The heating elements (bottom and circular) and the fan come on. This combination heats the oven rapidly by producing a considerable amount of heat, particularly from the bottom element. If you use more than one rack simultaneously, switch the position of the dishes halfway through the cooking process. [. . . ] • Ideally, the inside of the oven should be cleaned after each use, when it is still lukewarm. • All accessories - with the exception of the sliding racks - can be washed like everyday crockery. Inspecting the seals Check the door seals around the oven periodically. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). [. . . ]