User manual HOTPOINT FTGHL 641 D/IX/HA

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT FTGHL 641 D/IX/HA. We hope that this HOTPOINT FTGHL 641 D/IX/HA user guide will be useful to you.


HOTPOINT FTGHL 641 D/IX/HA : Download the complete user guide (16456 Ko)

You may also download the following manuals related to this product:

   HOTPOINT FTGHL 641 D/IX/HA (668 ko)
   HOTPOINT FTGHL 641 D/IX/HA (6661 ko)
   HOTPOINT FTGHL 641 D/IX/HA (12945 ko)
   HOTPOINT FTGHL 641 D/IX/HA (12945 ko)
   HOTPOINT FTGHL 641 D/IX/HA (6661 ko)
   HOTPOINT FTGHL 641 D/IX/HA (6661 ko)
   HOTPOINT FTGHL 641 D/IX/HA (6661 ko)
   HOTPOINT FTGHL 641 D/IX/HA (12945 ko)
   HOTPOINT FTGHL 641 D/IX/HA (486 ko)
   HOTPOINT FTGHL 641 D/IX/HA (1592 ko)

Manual abstract: user guide HOTPOINT FTGHL 641 D/IX/HA

Detailed instructions for use are in the User's Guide.

[. . . ] Warnings WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. [. . . ] Once connection has been carried out, make sure that the flexible metal pipe does not touch any moving parts and is not compressed. Only use pipes and seals that comply with current national regulations. When the installation process is complete, check the pipe fittings for leaks using a soapy solution. Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable pressure regulator must be fitted to the inlet pipe (in order to comply with current national regulations). DATA PLATE Electrical see data plate connections This appliance conforms to the following European Economic Community directives: - 2006/95/EC dated 12/12/06 (Low Voltage) and subsequent amendments - 2004/108/EC dated 15/12/04 (Electromagnetic Compatibility) and subsequent amendments - 93/68/EEC dated 22/07/93 and subsequent amendments. The hob can only be installed above built-in ovens with a cooling ventilation system. Electrical connection Hobs equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate (this is located on the lower part of the appliance). If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate. The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C. The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: • the appliance is earthed and the plug is compliant with the law. € the socket can withstand the maximum power of the appliance, which is indicated on the data plate. € the voltage is in the range between the values indicated on the data plate. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. Standard EN 30-2-1 Gas connection The appliance should be connected to the main gas supply in compliance with current national regulations. Before carrying out the connection, make sure the cooker is compatible with the gas supply you wish to use G20-20mbar (Natural Gas). [. . . ] Check these items frequently, and if necessary, clean them with a damp cloth. To avoid damaging the electric ignition device, do not use it when the burners are not in their housing. Gas tap maintenance Over time, the taps may become jammed or difficult to turn. This procedure must be performed by a qualified technician authorised by the manufacturer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT FTGHL 641 D/IX/HA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT FTGHL 641 D/IX/HA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.