User manual HOTPOINT FTGHL 641 D/IX/A AUS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT FTGHL 641 D/IX/A AUS. We hope that this HOTPOINT FTGHL 641 D/IX/A AUS user guide will be useful to you.


HOTPOINT FTGHL 641 D/IX/A AUS : Download the complete user guide (2595 Ko)

Manual abstract: user guide HOTPOINT FTGHL 641 D/IX/A AUS

Detailed instructions for use are in the User's Guide.

[. . . ] PKQ644DGH(K) AUS. 1 English Operating Instructions HOB Contents Operating Instructions, 1 Warnings, 2 Assistance, 3 Description of the appliance, 4 Installation, 5 Start-up and use, 8 Precautions and tips, 8 Maintenance and care, 9 Troubleshooting, 9 Warnings WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. [. . . ] Only use pipes and seals that comply with current national regulations. When the installation process is complete, check the pipe fittings for leaks using a soapy solution. Operation of the appliance must be tasted by the installer before leaving. Check all burners flames are blue in colour, stable and completely ignite at both high and low flame settings with no appreciable yellow tipping, carbon deposition, lifting, floating back or objectionable odour. For other minor adjustments or if the appliance does not perfrom correctly; contact Arisit Pty Ltd 1300 762 219 DATA PLATE Electrical see data plate connections m 560 m. 45 m m. !The hob can only be installed above built-in ovens with a cooling ventilation system. Electrical connection Hobs equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate (this is located on the lower part of the appliance). If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate. The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C. The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: • the appliance is earthed and the plug is compliant with the law. • the socket can withstand the maximum power of the appliance, which is indicated on the data plate. • the voltage is in the range between the values indicated on the data plate. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. ECODESIGN This appliance conforms to the EU Regulation no. standard EN 30-2-1 6 Burner and nozzle specifications Table 1 Burner Fast (R) Semi Fast (S) Auxiliary (A) Diameter Gas (mm) Consumption (MJ/h) 157 132 110 7. 5 5. 0 2. 5 Natural Gas (1. 0 kPa) Injector (mm) 143 112 83 Flow (l/h) (G20) 286 157 95 Adjusting the burner’s (Primary air) (mm) 10. 6 4. 0 3. 5 GB Test point pressure 1. 0 kPa with both Semi Fast burners operating at high Place the supplied duplicate data plate to a suitable adjacent surface or within the instruction manual for the future reference S S A R PKQ644DGH(K) AUS. 1 7 GB Start-up and use !• When the contents of the pan reach boiling point, turn the knob to minimum. Burner Rapid (R) Semi Rapid (S) Auxiliary (A) Ø Cookware Diameter (cm) 24 - 26 16 - 20 10 - 14 To identify the type of burner, refer to the designs in the section entitled, “Burner and Nozzle Specifications”. Make sure the pans do not overlap the edges of the hob while it is being used. • For maximum stability, always make sure that the pan supports are correctly fitted and that each pan is placed centrally over the burner. • Pan handles should be positioned in line with one of the support bars on the pan support grid. [. . . ] To avoid damaging the electric ignition device, do not use it when the burners are not in their housing. GB Disposal • When disposing of packaging material: observe local legislation so that the packaging may be reused. • The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT FTGHL 641 D/IX/A AUS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT FTGHL 641 D/IX/A AUS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.